Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four black DDR5 RDIMM modules with silver heat spreaders, 288-pin, 64GB total

V-color

V-color OC R-DIMM DDR5 64GB (4x16GB) 5600MHz CL36 ECC Registered 1.25V AMD EXPO

SKU CH-M8TQ-ZH6BV

Registered DDR5 kit with ECC and AMD EXPO profile running at 5600 MHz CL36 for TRX50 workstations

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL36
  • Timing36-38-38-80
  • Voltage1.25V

Capacity 64GB (4 x 16GB)

  • 64GB (4 x 16GB)
  • 128GB (4 x 32GB)
  • 192GB (4 x 48GB)
  • 256GB (4 x 64GB)
  • 512GB (4 x 128GB)
  • 1TB (4 x 256GB)
  • 384GB (4 x 96GB)

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

Speed DDR5 5600 (PC5 44800)

Rank 1Rx8

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • ECC registered design protects data integrity in critical workloads
  • AMD EXPO profile enables one-click overclocking on TRX50 platforms
  • Hynix ICs on 10-layer PCB deliver validated signal stability
  • DDR5 dual 40-bit channels double bandwidth over DDR4
  • 64 GB quad-channel kit runs at 5600 MHz CL36 1.25 V

Target Workstation Memory

This 64GB kit comprises four 16GB DDR5 registered DIMMs validated for AMD TRX50 workstation motherboards. Each module carries an AMD EXPO profile rated at 5600MHz with CL36-38-38-80 timings at 1.25V. On-die ECC and registered signalling protect data integrity in professional workloads.

Thermals and Power Draw

Hynix ICs on a 10-layer PCB distribute heat across the integrated spreader during typical operation. The registered buffer and on-board PMIC regulate voltage locally, keeping power draw predictable at the specified 1.25V. No active cooling is required for standard TRX50 workloads at the profiled frequency.

Sustained Load Behaviour

Under continuous load the EXPO profile maintains 5600MHz with the published CL36 latency without dropping to lower JEDEC speeds. Dual 40-bit sub-channels per DIMM preserve bandwidth efficiency across all four modules. Registered buffering and on-die ECC continue to correct errors throughout extended compute sessions.

Priekšrocības

  • ECC registered design protects data integrity in critical workloads
  • AMD EXPO profile enables one-click overclocking on TRX50 platforms
  • Hynix ICs on 10-layer PCB deliver validated signal stability
  • DDR5 dual 40-bit channels double bandwidth over DDR4
  • 64 GB quad-channel kit runs at 5600 MHz CL36 1.25 V

Specifikācijas

BrandV-Color
SeriesOC R-DIMM
ModelTRA516G56S836Q
Part NumberTRA516G56S836Q
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL36
Timing36-38-38-80
Voltage1.25V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
BIOS/Performance ProfileAMD EXPO
ChipsetHynix IC
Heat SpreaderYes
FeaturesOverclocking R-DIMM ECC Registered DIMM Memory for TRX50 Workstation (AMD Expo)

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

How do I install the 288-pin DDR5 RDIMMs on a TRX50 motherboard and which slot order is the step people get wrong?

Align the key notch on each 288-pin module with the slot, press straight down until both side clips click, and populate the four DIMM slots in the order the TRX50 manual specifies for quad-channel operation — skipping that sequence is the common mistake.

What maintenance or replacement will the on-board PMIC and Hynix ICs need later?

The on-board PMIC and Hynix ICs have no user-serviceable parts; keep the heat spreader clean and ensure case airflow stays unobstructed, and replace the full kit only if ECC logs report uncorrectable errors.

At what point does the CL36 5600MHz timing hit its limit under sustained load?

The CL36 36-38-38-80 timing at 1.25V remains stable until the on-die ECC correction capacity is exceeded or the PMIC thermal threshold is reached, whichever occurs first during prolonged heavy workloads.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.