Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Four silver DDR5 RDIMMs with black heat spreaders, 288-pin, 64GB total

V-color

V-color TRA516G68S834Q 64GB (4×16GB) DDR5 6800 CL34 OC R-DIMM ECC 1.4V

SKU CH-R4Z8-GBGTW

64 GB quad-channel DDR5 kit with ECC registered DIMMs at 6800 MHz CL34 and 1.4 V for TRX50 workstations

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6800 (PC5 54400)
  • CAS LatencyCL34
  • Timing34-46-46-92
  • Voltage1.40V

Capacity 64GB (4 x 16GB)

  • 64GB (4 x 16GB)
  • 128GB (4 x 32GB)
  • 192GB (4 x 48GB)
  • 256GB (4 x 64GB)
  • 512GB (4 x 128GB)
  • 1TB (4 x 256GB)
  • 384GB (4 x 96GB)

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

Speed DDR5 6800 (PC5 54400)

Rank 1Rx8

Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.

  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR5 6800 speed with CL34 latency delivers high throughput for TRX50 workstations
  • Registered ECC design with on-die error correction protects data integrity under load
  • AMD EXPO profile enables one-click overclocking on Threadripper PRO 7000 systems
  • 40 V operation on Hynix ICs with 10-layer PCB ensures stable overclocked performance

Workstation Memory for TRX50 Platforms

This 64 GB kit uses four 16 GB DDR5 registered DIMMs built with Hynix ICs on a 10-layer PCB. Each module runs at 6800 MT/s with CL34-46-46-92 timings at 1.40 V. On-die ECC and registered buffering protect data integrity for Threadripper PRO 7000 series workstations. The kit targets professionals who need stability under sustained loads.

AMD EXPO Profile Enables One-Click Overclocking

The bundled AMD EXPO profile stores the 6800 MT/s frequency and tight timings in the module SPD. Selecting it in BIOS applies the rated speed, voltage and latency without manual tuning. This saves configuration time and reduces the risk of unstable manual settings. Builders who prefer custom voltages or lower frequencies can still adjust values manually.

DDR5 Dual-Channel Architecture Doubles Sub-Channel

Each DIMM presents two independent 40-bit sub-channels, doubling burst throughput compared to DDR4. The on-board PMIC regulates power locally for cleaner signalling at 6800 MT/s. Registered buffering adds one clock cycle of command latency, a fixed trait of RDIMM topology. Systems without TRX50 chipset support cannot use these modules.

Priekšrocības

  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR5 6800 speed with CL34 latency delivers high throughput for TRX50 workstations
  • Registered ECC design with on-die error correction protects data integrity under load
  • AMD EXPO profile enables one-click overclocking on Threadripper PRO 7000 systems
  • 40 V operation on Hynix ICs with 10-layer PCB ensures stable overclocked performance

Specifikācijas

BrandV-Color
SeriesOC R-DIMM
ModelTRA516G68S834Q
Part NumberTRA516G68S834Q
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6800 (PC5 54400)
CAS LatencyCL34
Timing34-46-46-92
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
BIOS/Performance ProfileAMD EXPO
ChipsetHynix IC
Heat SpreaderYes
FeaturesOverclocking R-DIMM ECC Registered DIMM Memory for TRX50 Workstation (AMD Expo)

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

Will the Hynix ICs on these R-DIMMs need replacement under normal server workloads?

The modules use Hynix ICs on a 10-layer PCB with automated sorting and rigorous testing, so they are built for long-term reliability without scheduled IC replacement.

Does the CL34-46-46-92 timing limit sustained throughput before the 6800 MT/s speed does?

At DDR5 6800 the CAS latency is 34 cycles with 46-46-92 timings; the rated speed and latency are specified together, so neither is singled out as the first bottleneck.

How much heat does the 1.4 V registered design produce when running all day in a TRX50 workstation?

The kit runs at 1.40 V with an integrated heat spreader and on-board PMIC for efficient power delivery, keeping thermals controlled during continuous operation.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.