Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four silver DDR5 RDIMMs with black heat spreaders, 288-pin, 64GB total

V-color

V-color TRA516G68S834Q 64GB (4×16GB) DDR5 6800 CL34 OC R-DIMM ECC 1.4V

SKU CH-R4Z8-GBGTW

64 GB quad-channel DDR5 kit with ECC registered DIMMs at 6800 MHz CL34 and 1.4 V for TRX50 workstations

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6800 (PC5 54400)
  • CAS LatencyCL34
  • Timing34-46-46-92
  • Voltage1.40V

Capacity 64GB (4 x 16GB)

  • 64GB (4 x 16GB)
  • 128GB (4 x 32GB)
  • 192GB (4 x 48GB)
  • 256GB (4 x 64GB)
  • 512GB (4 x 128GB)
  • 1TB (4 x 256GB)
  • 384GB (4 x 96GB)

Yfirstrikaðar útgáfur eru til, en ekki til hér.

Speed DDR5 6800 (PC5 54400)

Rank 1Rx8

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR5 6800 speed with CL34 latency delivers high throughput for TRX50 workstations
  • Registered ECC design with on-die error correction protects data integrity under load
  • AMD EXPO profile enables one-click overclocking on Threadripper PRO 7000 systems
  • 40 V operation on Hynix ICs with 10-layer PCB ensures stable overclocked performance

Workstation Memory for TRX50 Platforms

This 64 GB kit uses four 16 GB DDR5 registered DIMMs built with Hynix ICs on a 10-layer PCB. Each module runs at 6800 MT/s with CL34-46-46-92 timings at 1.40 V. On-die ECC and registered buffering protect data integrity for Threadripper PRO 7000 series workstations. The kit targets professionals who need stability under sustained loads.

AMD EXPO Profile Enables One-Click Overclocking

The bundled AMD EXPO profile stores the 6800 MT/s frequency and tight timings in the module SPD. Selecting it in BIOS applies the rated speed, voltage and latency without manual tuning. This saves configuration time and reduces the risk of unstable manual settings. Builders who prefer custom voltages or lower frequencies can still adjust values manually.

DDR5 Dual-Channel Architecture Doubles Sub-Channel

Each DIMM presents two independent 40-bit sub-channels, doubling burst throughput compared to DDR4. The on-board PMIC regulates power locally for cleaner signalling at 6800 MT/s. Registered buffering adds one clock cycle of command latency, a fixed trait of RDIMM topology. Systems without TRX50 chipset support cannot use these modules.

Helstu kostir

  • 64 GB total capacity across four 16 GB modules for heavy workloads
  • DDR5 6800 speed with CL34 latency delivers high throughput for TRX50 workstations
  • Registered ECC design with on-die error correction protects data integrity under load
  • AMD EXPO profile enables one-click overclocking on Threadripper PRO 7000 systems
  • 40 V operation on Hynix ICs with 10-layer PCB ensures stable overclocked performance

Tæknilýsing

BrandV-Color
SeriesOC R-DIMM
ModelTRA516G68S834Q
Part NumberTRA516G68S834Q
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6800 (PC5 54400)
CAS LatencyCL34
Timing34-46-46-92
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
BIOS/Performance ProfileAMD EXPO
ChipsetHynix IC
Heat SpreaderYes
FeaturesOverclocking R-DIMM ECC Registered DIMM Memory for TRX50 Workstation (AMD Expo)

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the Hynix ICs on these R-DIMMs need replacement under normal server workloads?

The modules use Hynix ICs on a 10-layer PCB with automated sorting and rigorous testing, so they are built for long-term reliability without scheduled IC replacement.

Does the CL34-46-46-92 timing limit sustained throughput before the 6800 MT/s speed does?

At DDR5 6800 the CAS latency is 34 cycles with 46-46-92 timings; the rated speed and latency are specified together, so neither is singled out as the first bottleneck.

How much heat does the 1.4 V registered design produce when running all day in a TRX50 workstation?

The kit runs at 1.40 V with an integrated heat spreader and on-board PMIC for efficient power delivery, keeping thermals controlled during continuous operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.