Vetroo 20-Port Fan Hub with Remote, SATA Power, 10 PWM + 10 ARGB (Pink)
- Pink
- ARGB
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Vetroo
Three 120 mm PWM fans with ARGB lighting, hydraulic bearings and a controller for synchronised speed and colour
Number 3-Pack w/ Controller
Pārsvītrotās versijas pastāv, taču šeit nav pieejamas.
The Vetroo ICE BLADE ARGB120 WT ships as a set of three 120 mm fans with addressable RGB lighting and PWM control. Each unit uses a hydro bearing rated for up to 50,000 hours and connects via standard 3- or 4-pin headers. The black frame and transparent blades suit builders who want coordinated lighting across multiple intake or exhaust positions.
Under continuous operation the fans run between 800 and 1,300 RPM, delivering 35 to 40 CFM while staying at 20 to 25 dBA. The manufacturer also quotes a peak of 48.1 CFM at 26 dBA when the curve ramps to the 1,600 RPM ceiling. Eight rubber anti-vibration pads on each corner dampen resonance that typically appears after hours of constant spinning.
The bundle includes a dedicated ARGB controller and a remote, so lighting and speed can be managed without a 5 V 3-pin motherboard header. Builders who rely solely on motherboard sync must verify a 5 V 3-pin RGB connector is free; a 12 V 4-pin RGB header will not work. The 25 mm thickness fits standard 120 mm mounts, but cable routing for three fans plus the controller hub can crowd tight rear or top panels.
| Brand | Vetroo |
|---|---|
| Series | ICE BLADE |
| Model | ARGB120 WT |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 35-40 CFM |
| Noise Level | 20 - 25 dBA |
| Power Connector | 3 / 4 Pin |
| Color | Black |
| LED | ARGB |
| Dimensions | 120 * 25* 120 mm |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
At maximum RPM the fans reach 26 dBA, and the included eight rubber pads dampen vibration for quiet all-day operation.
Each fan needs a 3-pin or 4-pin fan header for power and a 5 V 3-pin ARGB header for addressable lighting sync.
Yes, the controller accepts the fans' 3/4-pin connectors so PWM and older DC fans can be managed together from one hub.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?