Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

Vetroo

Vetroo ICE BLADE ARGB120 WT 3-pack 120mm ARGB PWM case fans

SKU CH-CJY4-FN2HC

Three 120 mm PWM fans with ARGB lighting, hydraulic bearings and a controller for synchronised speed and colour

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM

Color Black

Number 3-Pack w/ Controller

  • 1-Pack
  • 3-Pack w/ Controller

Preškrtnuté verzie existujú, ale nie sú tu skladom.

  • ARGB sync via 5V 3-pin header for custom lighting
  • PWM auto-adjusts 800–1300 RPM to chassis temperature
  • 8 rubber pads cut vibration for 20–25 dBA quiet running
  • Included controller and remote manage RGB effects and fan speed
  • 35–40 CFM airflow at up to 1600 RPM cools components efficiently

Three-pack ARGB case fans

The Vetroo ICE BLADE ARGB120 WT ships as a set of three 120 mm fans with addressable RGB lighting and PWM control. Each unit uses a hydro bearing rated for up to 50,000 hours and connects via standard 3- or 4-pin headers. The black frame and transparent blades suit builders who want coordinated lighting across multiple intake or exhaust positions.

Sustained-load airflow and acoustics

Under continuous operation the fans run between 800 and 1,300 RPM, delivering 35 to 40 CFM while staying at 20 to 25 dBA. The manufacturer also quotes a peak of 48.1 CFM at 26 dBA when the curve ramps to the 1,600 RPM ceiling. Eight rubber anti-vibration pads on each corner dampen resonance that typically appears after hours of constant spinning.

Installation notes and common issues

The bundle includes a dedicated ARGB controller and a remote, so lighting and speed can be managed without a 5 V 3-pin motherboard header. Builders who rely solely on motherboard sync must verify a 5 V 3-pin RGB connector is free; a 12 V 4-pin RGB header will not work. The 25 mm thickness fits standard 120 mm mounts, but cable routing for three fans plus the controller hub can crowd tight rear or top panels.

Prednosti

  • ARGB sync via 5V 3-pin header for custom lighting
  • PWM auto-adjusts 800–1300 RPM to chassis temperature
  • 8 rubber pads cut vibration for 20–25 dBA quiet running
  • Included controller and remote manage RGB effects and fan speed
  • 35–40 CFM airflow at up to 1600 RPM cools components efficiently

Špecifikácie

BrandVetroo
SeriesICE BLADE
ModelARGB120 WT
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level20 - 25 dBA
Power Connector3 / 4 Pin
ColorBlack
LEDARGB
Dimensions120 * 25* 120 mm

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How loud are the three ICE BLADE ARGB120 WT fans when running continuously at full speed?

At maximum RPM the fans reach 26 dBA, and the included eight rubber pads dampen vibration for quiet all-day operation.

What motherboard headers are required to power and control the RGB lighting on these fans?

Each fan needs a 3-pin or 4-pin fan header for power and a 5 V 3-pin ARGB header for addressable lighting sync.

Will the bundled controller and remote let me run these fans alongside older 3-pin DC fans on the same system?

Yes, the controller accepts the fans' 3/4-pin connectors so PWM and older DC fans can be managed together from one hub.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.