Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Large rectangular CO2 laser engraver on metal frame with honeycomb bed and front pass-through doors

VEVOR

VEVOR KH9060 100W CO2 Laser Engraver 24 x 35 in

SKU CH-QTAQ-T3TW0

A 100W CO₂ laser engraver with a 24 x 35 in working area cuts up to .59 in thick at 19.7 IPS and works with LightBurn, CorelDRAW and AutoCAD on Windows, Mac OS and Linux

  • TypeOther Appliances
  • 100 W laser tube cuts 15 mm acrylic in one pass
  • 600 × 900 mm bed gives 840 in² project space
  • 500 mm/s engraving speed finishes jobs quickly
  • Works with LightBurn, CorelDRAW and AutoCAD on Windows, Mac and Linux
  • Front and rear pass-through doors accept longer workpieces

100W CO₂ Laser Engraver

The VEVOR KH9060 is a 100W CO₂ laser engraver and cutter with a 24 x 35 in working area. It delivers cutting speeds up to 19.7 IPS and can cut acrylic up to .59 in thick in one pass. The machine operates on AC 120V power and offers an 8000H laser tube life.

Makers needing large-format cutting

This engraver suits users who need a spacious 840 in² bed for wood, acrylic, leather and similar materials. It is not for buyers who require metal marking capability or a fully enclosed Class 1 safety enclosure for unattended operation.

Bundled accessories for immediate start

The package includes a smoke exhaust pipe, grounding wire, data and network cables, plus a USB flash drive. These items let you connect to LightBurn, CorelDRAW or AutoCAD on Windows, Mac or Linux and begin venting fumes right away.

Priekšrocības

  • 100 W laser tube cuts 15 mm acrylic in one pass
  • 600 × 900 mm bed gives 840 in² project space
  • 500 mm/s engraving speed finishes jobs quickly
  • Works with LightBurn, CorelDRAW and AutoCAD on Windows, Mac and Linux
  • Front and rear pass-through doors accept longer workpieces

Specifikācijas

TypeOther Appliances

Jautājumi par šo preci

What voltage supply does the KH9060 need?

The engraver runs on AC 120V at 60Hz, so a standard North American outlet is sufficient.

Will the 19.7 IPS speed work with my existing LightBurn licence?

Yes, the machine is compatible with LightBurn, CorelDRAW and AutoCAD on Windows, Linux and MacOS.

How can I confirm the laser tube is performing correctly after installation?

The tube is rated for 8000 hours; monitor cutting depth on 15 mm acrylic and listen for the 70 dB operating noise as a baseline.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.