Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Large rectangular CO2 laser engraver on metal frame with honeycomb bed and front pass-through doors

VEVOR

VEVOR KH9060 100W CO2 Laser Engraver 24 x 35 in

SKU CH-QTAQ-T3TW0

A 100W CO₂ laser engraver with a 24 x 35 in working area cuts up to .59 in thick at 19.7 IPS and works with LightBurn, CorelDRAW and AutoCAD on Windows, Mac OS and Linux

  • TypeOther Appliances
  • 100 W laser tube cuts 15 mm acrylic in one pass
  • 600 × 900 mm bed gives 840 in² project space
  • 500 mm/s engraving speed finishes jobs quickly
  • Works with LightBurn, CorelDRAW and AutoCAD on Windows, Mac and Linux
  • Front and rear pass-through doors accept longer workpieces

100W CO₂ Laser Engraver

The VEVOR KH9060 is a 100W CO₂ laser engraver and cutter with a 24 x 35 in working area. It delivers cutting speeds up to 19.7 IPS and can cut acrylic up to .59 in thick in one pass. The machine operates on AC 120V power and offers an 8000H laser tube life.

Makers needing large-format cutting

This engraver suits users who need a spacious 840 in² bed for wood, acrylic, leather and similar materials. It is not for buyers who require metal marking capability or a fully enclosed Class 1 safety enclosure for unattended operation.

Bundled accessories for immediate start

The package includes a smoke exhaust pipe, grounding wire, data and network cables, plus a USB flash drive. These items let you connect to LightBurn, CorelDRAW or AutoCAD on Windows, Mac or Linux and begin venting fumes right away.

Helstu kostir

  • 100 W laser tube cuts 15 mm acrylic in one pass
  • 600 × 900 mm bed gives 840 in² project space
  • 500 mm/s engraving speed finishes jobs quickly
  • Works with LightBurn, CorelDRAW and AutoCAD on Windows, Mac and Linux
  • Front and rear pass-through doors accept longer workpieces

Tæknilýsing

TypeOther Appliances

Spurningar um þessa vöru

What voltage supply does the KH9060 need?

The engraver runs on AC 120V at 60Hz, so a standard North American outlet is sufficient.

Will the 19.7 IPS speed work with my existing LightBurn licence?

Yes, the machine is compatible with LightBurn, CorelDRAW and AutoCAD on Windows, Linux and MacOS.

How can I confirm the laser tube is performing correctly after installation?

The tube is rated for 8000 hours; monitor cutting depth on 15 mm acrylic and listen for the 70 dB operating noise as a baseline.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.