LONGER
LONGER Laser Engraver Enclosure with Vent 27.5 x 27.5 x 13 inches
- Laser Engraver
69,99 $
0.0008953BTC
Krājumā
VEVOR
VEVOR P3 Pro 20W Laser Engraver 19.7 x 12.6 in
20 W diode laser engraves and cuts wood, leather, glass, paper and certain metals at up to 36,000 mm/min inside a 19.7 x 12.6 in Class 1 enclosure
- TypeOther Appliances
- Cuts 0.3 in basswood in one pass with 20 W output
- 7 x 12.6 in work area fits larger projects
- 36 000 mm/min top speed finishes jobs faster
- Class 1 enclosure blocks light, smoke and noise for safety
- Auto positioning via 455 nm diode and 0.08 x 0.08 mm spot delivers precise edges
20 W diode engraver for desktop makers
The VEVOR P3 Pro delivers 20 W optical power from a 455 nm blue diode with a 0.08 x 0.08 mm spot. Its 19.7 x 12.6 in working area suits hobbyists and small workshops cutting wood, leather, glass, paper and certain metals. Class 1 enclosure with emergency stop, tilt sensor and limit switches keeps the beam contained during operation.
Sustained cutting at 36 000 mm/min
A 32-bit control board drives the gantry to the rated 36 000 mm/min maximum engraving speed. The machine cuts 0.3 in basswood in a single pass, showing that the motion system maintains throughput on longer jobs. Aluminium frame rigidity and the enclosed airflow path help stability when the laser runs continuously.
Software and material limits
Control is limited to LaserGRBL on Windows, LightBurn on macOS or Windows, and Burnlab; no other firmware or cloud platforms are supported. The diode wavelength and 20 W output restrict effective marking on reflective or transparent metals without coating. Buyers needing fibre-laser metal marking or larger bed sizes must look elsewhere.
Priekšrocības
- Cuts 0.3 in basswood in one pass with 20 W output
- 7 x 12.6 in work area fits larger projects
- 36 000 mm/min top speed finishes jobs faster
- Class 1 enclosure blocks light, smoke and noise for safety
- Auto positioning via 455 nm diode and 0.08 x 0.08 mm spot delivers precise edges
Specifikācijas
| Type | Other Appliances |
|---|
Jautājumi par šo preci
How loud and hot does the Class 1 enclosure get during a full-day 20W engraving run?
The protective enclosure filters laser light, blocks smoke and dampens noise; emergency stop, tilt stop, limit switches and a security lock provide all-around safety during extended use.
Which software must I already own or install to operate the 455 nm diode laser with 0.08 mm spot size?
The machine supports LaserGRBL on Windows, LightBurn on Mac OS and Windows (paid licence), and Burnlab; choose one to prepare and send jobs to the 32-bit control board.
Will the 500 x 320 mm bed and 36,000 mm/min top speed work with my older GRBL-based controller and limit-switch wiring?
The unit ships with its own 32-bit control board and built-in limit switches; it is not designed to be driven by an external legacy GRBL board.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
