Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact enclosed laser engraver with viewing window and 19.7 by 12.6 inch work area

VEVOR

VEVOR P3 Pro 20W Laser Engraver 19.7 x 12.6 in

SKU CH-NQYC-3F6SQ

20 W diode laser engraves and cuts wood, leather, glass, paper and certain metals at up to 36,000 mm/min inside a 19.7 x 12.6 in Class 1 enclosure

  • TypeOther Appliances
  • Cuts 0.3 in basswood in one pass with 20 W output
  • 7 x 12.6 in work area fits larger projects
  • 36 000 mm/min top speed finishes jobs faster
  • Class 1 enclosure blocks light, smoke and noise for safety
  • Auto positioning via 455 nm diode and 0.08 x 0.08 mm spot delivers precise edges

20 W diode engraver for desktop makers

The VEVOR P3 Pro delivers 20 W optical power from a 455 nm blue diode with a 0.08 x 0.08 mm spot. Its 19.7 x 12.6 in working area suits hobbyists and small workshops cutting wood, leather, glass, paper and certain metals. Class 1 enclosure with emergency stop, tilt sensor and limit switches keeps the beam contained during operation.

Sustained cutting at 36 000 mm/min

A 32-bit control board drives the gantry to the rated 36 000 mm/min maximum engraving speed. The machine cuts 0.3 in basswood in a single pass, showing that the motion system maintains throughput on longer jobs. Aluminium frame rigidity and the enclosed airflow path help stability when the laser runs continuously.

Software and material limits

Control is limited to LaserGRBL on Windows, LightBurn on macOS or Windows, and Burnlab; no other firmware or cloud platforms are supported. The diode wavelength and 20 W output restrict effective marking on reflective or transparent metals without coating. Buyers needing fibre-laser metal marking or larger bed sizes must look elsewhere.

Kohokohdat

  • Cuts 0.3 in basswood in one pass with 20 W output
  • 7 x 12.6 in work area fits larger projects
  • 36 000 mm/min top speed finishes jobs faster
  • Class 1 enclosure blocks light, smoke and noise for safety
  • Auto positioning via 455 nm diode and 0.08 x 0.08 mm spot delivers precise edges

Tekniset tiedot

TypeOther Appliances

Kysymyksiä tästä tuotteesta

How loud and hot does the Class 1 enclosure get during a full-day 20W engraving run?

The protective enclosure filters laser light, blocks smoke and dampens noise; emergency stop, tilt stop, limit switches and a security lock provide all-around safety during extended use.

Which software must I already own or install to operate the 455 nm diode laser with 0.08 mm spot size?

The machine supports LaserGRBL on Windows, LightBurn on Mac OS and Windows (paid licence), and Burnlab; choose one to prepare and send jobs to the 32-bit control board.

Will the 500 x 320 mm bed and 36,000 mm/min top speed work with my older GRBL-based controller and limit-switch wiring?

The unit ships with its own 32-bit control board and built-in limit switches; it is not designed to be driven by an external legacy GRBL board.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.