Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Vszerda 10 Gigabit Ethernet PCIe x1 network card with low profile bracket

Vszerda

Vszerda 10 Gigabit Ethernet PCIe x1 Network Card

SKU CH-8NJ7-61W90

Single-port 10 Gbps Ethernet adapter with Aquantia AQC113 chipset, PCIe x1 interface and low-profile bracket for desktop or server use

  • Speed10 gigabits_per_second
  • FeaturesDesktop
  • Package ContentsLow Profile Bracket, Manual, Driver CD
  • 10 Gbps throughput for large-file transfers
  • Aquantia AQC113 chipset for stable Windows and Linux operation
  • PCIe x1 interface fits low-profile and full-height slots
  • Supports 100 M, 1 G, 2.5 G, 5 G and 10 G link rates
  • 1Q VLAN tagging for segmented network traffic

Vszerda 10 Gigabit Ethernet Adapter

The Vszerda single-port network card adds a 10 Gbps Ethernet connection to a desktop computer through a PCIe x1 slot. It uses the Aquantia AQC113 chipset and supports speeds of 10, 5, 2.5, 1 and 0.1 Gbps. The package includes both a 12 cm and an 8 cm bracket for low-profile cases. Drivers are supplied for Windows 11, 10, 8.1 and Linux.

Practical limits of PCIe x1 at 10 Gbps

A PCIe 2.0 x1 link provides roughly 5 Gbps of usable bandwidth, so the card cannot reach its full 10 Gbps rate in that slot. PCIe 3.0 x1 lifts the ceiling to about 8 Gbps, still short of line rate. Only a PCIe 3.0 x2 or wider connection removes the bottleneck. The card negotiates down to 5 Gbps or 2.5 Gbps automatically when the link or partner cannot sustain 10 Gbps.

Check slot generation

Verify that your motherboard exposes a PCIe 3.0 x1 or better slot; a PCIe 2.0 x1 slot will cap throughput at half the rated speed. Confirm your switch or router has 10 Gbps, 5 Gbps or 2.5 Gbps ports — standard 1 Gbps ports will limit the link to 1 Gbps. Ensure the operating system is Windows 11, 10, 8.1 or a current Linux kernel for driver support.

Priekšrocības

  • 10 Gbps throughput for large-file transfers
  • Aquantia AQC113 chipset for stable Windows and Linux operation
  • PCIe x1 interface fits low-profile and full-height slots
  • Supports 100 M, 1 G, 2.5 G, 5 G and 10 G link rates
  • 1Q VLAN tagging for segmented network traffic

Specifikācijas

BrandIO Crest
Speed10 gigabits_per_second
FeaturesDesktop
Package ContentsLow Profile Bracket, Manual, Driver CD

Jautājumi par šo preci

What speed versions does this card support?

The adapter runs at 10 Gbps and auto-negotiates down to 5 Gbps, 2.5 Gbps, 1000 Mbps, 100 Mbps and 10 Mbps.

What real-world throughput can I expect from the 10 Gbps rating?

The AQC113 chipset delivers up to 10 Gbps of raw bandwidth; actual file-transfer speeds depend on your storage, CPU and cabling but will be far above 1 Gbps.

Will the PCIe x1 slot limit the 10 Gbps speed?

The card uses a PCIe x1 interface; at PCIe 3.0 or newer the single lane provides enough bandwidth for full 10 Gbps line rate.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.