Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green PCB riser card with PCIe x1 male edge connector and x16 female slot

Vszerda

Vszerda PCI-E 1x to 16x Extender Riser Card

SKU CH-HPMN-KGZDW

Connects a graphics card to a single PCIe lane via 16-lane slot at 1x speed

  • Extends a graphics card from a 1x slot
  • Supports 1x, 4x, 8x and 16x cards at 1x speed
  • Driver-free installation saves setup time
  • Multi-layer PCB design maintains signal quality
  • Not compatible with PCI ports or 16x RAID cards

Extending graphics cards from a 1x slot

This riser adapter lets you install a PCIe x16 graphics card into an open x1 slot on the motherboard. It is intended for builders who need to add a GPU when all full-length slots are occupied or when a compact board only provides a single x1 connection. The card works with x1, x4, x8 and x16 devices, though only x1 electrical speed is delivered. It does not support legacy PCI cards or PCIe x16 RAID controllers.

Sustained operation at x1 bandwidth

Because the adapter only wires a single lane, the connected graphics card runs at PCIe 1x throughput for the entire workload. This limits sustained transfer rates to the bandwidth of one lane, so compute-heavy tasks that saturate the bus will see reduced performance compared with a native x16 slot. The PCB uses a multi-layer design to maintain signal integrity over the extension, and no driver installation is required for the link to function.

Physical layout and daily handling

The male x1 connector plugs into the motherboard while the female x16 socket accepts the graphics card, allowing flexible placement inside the chassis. Hot-swap is not supported, so the system must be powered down before inserting or removing the card. The rigid PCB construction resists flex during installation, and the straightforward pinout means the adapter adds no extra configuration steps beyond the physical connection.

Priekšrocības

  • Extends a graphics card from a 1x slot
  • Supports 1x, 4x, 8x and 16x cards at 1x speed
  • Driver-free installation saves setup time
  • Multi-layer PCB design maintains signal quality
  • Not compatible with PCI ports or 16x RAID cards

Specifikācijas

Šai precei pagaidām nav publicētu specifikāciju.

Jautājumi par šo preci

Does the Vszerda riser generate noticeable heat or draw extra power when a graphics card runs all day through the 1x link?

The adapter uses a simple layered PCB with no active components, so it adds negligible heat and only the minimal power the slot itself provides.

What must the system already have for this Vszerda extender to function?

A free PCIe x1 slot on the motherboard and a graphics card that operates at x1 speed; no drivers or external power connections are required.

Will an older PCIe x16 graphics card work correctly in this Vszerda adapter?

Yes, the card will be detected and run at x1 bandwidth because the riser wires only a single lane regardless of the card's physical connector.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.