Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 70x25mm case fan with three-pin connector

Zyvpee

Zyvpee 2810KL-04W-B39 P51 70x25mm 12V 0.19A 3-pin case fan

SKU CH-S14M-2JEW6

A 70 mm ball-bearing case fan with a 3-pin 12 V connector for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing for long service life
  • 70 mm frame fits compact cases
  • 12 V 0.19 A draws little power
  • Three-pin connector for direct motherboard control
  • 25 mm thickness clears tight clearances

Compact 70 mm case fan for tight builds

The Zyvpee 2810KL-04W-B39 P51 is a 70 mm square frame fan designed for small-form-factor chassis or targeted component cooling. Its 25 mm thickness fits standard 7025 mounting holes and the three-pin connector provides basic voltage control on compatible headers.

Ball-bearing airflow with modest headroom

Rated at 12 V and 0.19 A the fan delivers enough pressure for CPU heatsinks or restricted intake paths in compact cases. It will struggle in high-restriction radiators or multi-drive cages where static pressure demands exceed its design envelope.

Quiet operation within low-power limits

The ball bearing runs smoothly at the rated current, keeping acoustic output low during typical desktop loads. Power draw stays at 0.19 A so the fan adds minimal load to a 12 V rail and requires no additional power planning.

Priekšrocības

  • Ball bearing for long service life
  • 70 mm frame fits compact cases
  • 12 V 0.19 A draws little power
  • Three-pin connector for direct motherboard control
  • 25 mm thickness clears tight clearances

Specifikācijas

BrandZyvpee
Series2810KL-04W-B39 P51
Model2810KL-04W-B39
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions70*25MM

Jautājumi par šo preci

Will this 70mm fan fit alongside my existing case fans using the same 3-pin headers?

Yes, it uses a standard 3-pin power connector compatible with typical motherboard headers, and its 70mm frame matches common mounting holes for that size.

How can I confirm the 2810KL-04W-B39 P51 is spinning correctly after installation?

Check the RPM reading in BIOS or fan-control software; the 3-pin connector reports speed so you can verify the ball-bearing motor is running.

Does the 2810KL-04W-B39 P51 include mounting screws or must I supply them?

The supplied photos show only the fan with its 3-wire lead; no screws or extra cables are pictured, so plan to use your own 70mm mounting hardware.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.