暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Zyvpee

Zyvpee 2810KL-04W-B39 P51 70x25mm 12V 0.19A 3-pin case fan

SKU CH-S14M-2JEW6

A 70 mm ball-bearing case fan with a 3-pin 12 V connector for CPU cooling

  • TypeCase Fan
  • Bearing TypeBall
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • FeaturesCPU Cooling
  • Ball bearing for long service life
  • 70 mm frame fits compact cases
  • 12 V 0.19 A draws little power
  • Three-pin connector for direct motherboard control
  • 25 mm thickness clears tight clearances

Compact 70 mm case fan for tight builds

The Zyvpee 2810KL-04W-B39 P51 is a 70 mm square frame fan designed for small-form-factor chassis or targeted component cooling. Its 25 mm thickness fits standard 7025 mounting holes and the three-pin connector provides basic voltage control on compatible headers.

Ball-bearing airflow with modest headroom

Rated at 12 V and 0.19 A the fan delivers enough pressure for CPU heatsinks or restricted intake paths in compact cases. It will struggle in high-restriction radiators or multi-drive cages where static pressure demands exceed its design envelope.

Quiet operation within low-power limits

The ball bearing runs smoothly at the rated current, keeping acoustic output low during typical desktop loads. Power draw stays at 0.19 A so the fan adds minimal load to a 12 V rail and requires no additional power planning.

特長

  • Ball bearing for long service life
  • 70 mm frame fits compact cases
  • 12 V 0.19 A draws little power
  • Three-pin connector for direct motherboard control
  • 25 mm thickness clears tight clearances

仕様

BrandZyvpee
Series2810KL-04W-B39 P51
Model2810KL-04W-B39
TypeCase Fan
Bearing TypeBall
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions70*25MM

この商品に関する質問

Will this 70mm fan fit alongside my existing case fans using the same 3-pin headers?

Yes, it uses a standard 3-pin power connector compatible with typical motherboard headers, and its 70mm frame matches common mounting holes for that size.

How can I confirm the 2810KL-04W-B39 P51 is spinning correctly after installation?

Check the RPM reading in BIOS or fan-control software; the 3-pin connector reports speed so you can verify the ball-bearing motor is running.

Does the 2810KL-04W-B39 P51 include mounting screws or must I supply them?

The supplied photos show only the fan with its 3-wire lead; no screws or extra cables are pictured, so plan to use your own 70mm mounting hardware.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。