Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 170 mm all-metal axial case fan with 2-pin connector

Zyvpee

Zyvpee 7114NHR 170mm 24Vdc 19W 2 Pin Case Fan

SKU CH-X2BC-390HR

A 170 mm all-metal axial case fan with dual-ball bearings, 24 V 19 W power and a 2-pin connector running at 3350 RPM

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size170mm
  • Bearing Type2 Ball
  • RPM3350
  • Power Connector2 Pin
  • 170 mm frame fits standard 170 mm mounts
  • 3350 RPM delivers strong airflow for cooling
  • Dual ball bearing extends operating life
  • 24 V 19 W draw suits industrial power rails
  • All-metal housing resists vibration and heat

170 mm 24 V DC axial fan for industrial cases

The Zyvpee 7114NHR is a 170 mm all-metal axial cooler designed for 24 V DC systems. It draws 19 W at a fixed 3350 RPM using a two-ball bearing. The two-pin connector suits power supplies without PWM control. Builders integrating ABB inverter gear or similar 24 V infrastructure will find it a direct fit.

Fixed-speed 24 V supply limits speed control

The fan runs at a constant 3350 RPM whenever 24 V is present. No PWM or voltage-regulation header is provided on the two-pin lead, so speed cannot be adjusted from a motherboard. Systems requiring variable airflow must implement external voltage control. The 19 W draw also demands a 24 V source rated for at least that continuous load.

Replaces 172 mm metal-frame fans in 24 V enclosures

This unit fits the 172 mm by 150 mm by 38 mm footprint common in legacy ABB inverter cabinets. It upgrades older sleeve-bearing models that have worn out or become noisy. The jump is worthwhile when the original fan fails or when a two-ball bearing is preferred for longer service life in continuous operation.

Priekšrocības

  • 170 mm frame fits standard 170 mm mounts
  • 3350 RPM delivers strong airflow for cooling
  • Dual ball bearing extends operating life
  • 24 V 19 W draw suits industrial power rails
  • All-metal housing resists vibration and heat

Specifikācijas

Series7114NHR
Model7114NHR
TypeCase Fan
CompatibilityCase
Fan Size170mm
Bearing Type2 Ball
RPM3350
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC axial fan
Dimensions172*150*38MM

Jautājumi par šo preci

Should I pick the 170 mm 24 Vdc 19 W version or a different voltage?

This model runs on 24 Vdc and draws 19 W; choose it only if your system provides a 24 V rail.

What does the 3350 RPM rating mean for airflow in my chassis?

At 3350 RPM the 170 mm all-metal axial fan moves a high volume of air through the 38 mm thick frame for strong case cooling.

The 2-pin connector — does it limit speed control or monitoring?

A 2-pin connector supplies power only, so the fan runs at full 3350 RPM without PWM speed control or tachometer feedback.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.