Zyvpee
Zyvpee 8414NGH 80×25 mm 24 V 2.8 W 2-wire case fan
An 80 × 25 mm case fan with 2-ball bearings, 24 V power and 2.8 W draw
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector2 wires
- ColorBlack
- LEDNon-LED
- Dual ball bearings extend service life
- 24 V 2.8 W input suits inverter systems
- Compact 80 × 25 mm frame fits tight bays
- 8414NGH ebmpapst motor delivers steady airflow
- Two-wire power lead simplifies installation
Zyvpee 8414NGH 80×25 mm 24 V case fan
This 80 mm square frame fits standard 80 mm mounting points and runs on a 24 V supply. The 2-wire lead delivers power without a separate signal line. It uses a dual-ball bearing for continuous operation in server or inverter enclosures.
Suits builds with a 24 V rail and 80 mm bays
It is not for systems that lack a 24 V source or that expect a third wire for tachometer feedback or PWM control. Builders needing variable-speed headers or LED lighting should look elsewhere.
24 V 2.8 W power rating
The fan draws 2.8 W at 24 V, so the supply must provide that voltage and current. The two-wire connector cannot report speed or accept PWM commands. Match the rail and connector before ordering.
Priekšrocības
- Dual ball bearings extend service life
- 24 V 2.8 W input suits inverter systems
- Compact 80 × 25 mm frame fits tight bays
- 8414NGH ebmpapst motor delivers steady airflow
- Two-wire power lead simplifies installation
Specifikācijas
| Series | 8414NGH |
|---|---|
| Model | 8414NGH |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 2 wires |
| Color | Black |
| LED | Non-LED |
| Features | DC square Cooler |
| Dimensions | 80*80*25mm |
Jautājumi par šo preci
What power source do I need to run the 24 V 2.8 W 2-wire fan?
You need a 24 V DC supply capable of at least 2.8 W; the two bare leads connect directly to that source.
Will the 80 mm 25 mm frame fit the same mounting holes as my existing 80 mm fan?
Yes — the 80 mm square frame with 25 mm thickness uses the standard 80 mm mounting pattern, so it lines up with existing holes.
How can I confirm the 8414NGH is spinning correctly after installation?
Verify the blades rotate smoothly, listen for quiet ball-bearing operation, and check that your monitoring software reports a stable RPM reading.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001049BTC
Krājumā