暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80 by 25 mm 24 V 2.8 W 2-wire case fan

Zyvpee

Zyvpee 8414NGH 80×25 mm 24 V 2.8 W 2-wire case fan

SKU CH-VF9X-10R9G

An 80 × 25 mm case fan with 2-ball bearings, 24 V power and 2.8 W draw

  • TypeCase Fan
  • CompatibilityCase
  • Bearing Type2 Ball
  • Power Connector2 wires
  • ColorBlack
  • LEDNon-LED
  • Dual ball bearings extend service life
  • 24 V 2.8 W input suits inverter systems
  • Compact 80 × 25 mm frame fits tight bays
  • 8414NGH ebmpapst motor delivers steady airflow
  • Two-wire power lead simplifies installation

Zyvpee 8414NGH 80×25 mm 24 V case fan

This 80 mm square frame fits standard 80 mm mounting points and runs on a 24 V supply. The 2-wire lead delivers power without a separate signal line. It uses a dual-ball bearing for continuous operation in server or inverter enclosures.

Suits builds with a 24 V rail and 80 mm bays

It is not for systems that lack a 24 V source or that expect a third wire for tachometer feedback or PWM control. Builders needing variable-speed headers or LED lighting should look elsewhere.

24 V 2.8 W power rating

The fan draws 2.8 W at 24 V, so the supply must provide that voltage and current. The two-wire connector cannot report speed or accept PWM commands. Match the rail and connector before ordering.

特長

  • Dual ball bearings extend service life
  • 24 V 2.8 W input suits inverter systems
  • Compact 80 × 25 mm frame fits tight bays
  • 8414NGH ebmpapst motor delivers steady airflow
  • Two-wire power lead simplifies installation

仕様

Series8414NGH
Model8414NGH
TypeCase Fan
CompatibilityCase
Bearing Type2 Ball
Power Connector2 wires
ColorBlack
LEDNon-LED
FeaturesDC square Cooler
Dimensions80*80*25mm

この商品に関する質問

What power source do I need to run the 24 V 2.8 W 2-wire fan?

You need a 24 V DC supply capable of at least 2.8 W; the two bare leads connect directly to that source.

Will the 80 mm 25 mm frame fit the same mounting holes as my existing 80 mm fan?

Yes — the 80 mm square frame with 25 mm thickness uses the standard 80 mm mounting pattern, so it lines up with existing holes.

How can I confirm the 8414NGH is spinning correctly after installation?

Verify the blades rotate smoothly, listen for quiet ball-bearing operation, and check that your monitoring software reports a stable RPM reading.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。