Zyvpee
Zyvpee AFB03512HA 35mm 12V 0.12A 2-wire case fan
A 35 mm ball-bearing case fan running at 12 V and 0.12 A with a two-wire power connector
- TypeCase Fan
- CompatibilityCase
- Fan Size35mm
- Bearing TypeBall
- Power Connector2 Wires
- ColorBlack
- Ultra-compact 35 mm footprint fits tight chassis spaces
- Ball-bearing motor ensures long-life operation at 12 V
- Low 0.12 A draw keeps power budget minimal
- Simple two-wire DC connection for quick installation
- Non-LED black design blends into any build
Compact 35 mm case fan
The Zyvpee AFB03512HA is a 35 mm square DC fan designed for tight case clearances. It runs on 12 V and draws 0.12 A through a two-wire power connector. Ball-bearing construction supports continuous operation in small-form-factor builds.
Suits space-constrained builds.
This fan fits builders replacing a 35 mm unit or adding spot cooling where only a 35 mm frame fits. The two-wire design means speed cannot be PWM-controlled, so buyers who need motherboard fan-curve management should look elsewhere. It also lacks LED lighting for illuminated builds.
35 mm frame with 10 mm depth
The physical footprint is 35 mm by 35 mm with a 10 mm thickness, matching the 35*10 mm specification. Verify that your chassis or heatsink mounting holes accept this exact frame size before ordering.
Priekšrocības
- Ultra-compact 35 mm footprint fits tight chassis spaces
- Ball-bearing motor ensures long-life operation at 12 V
- Low 0.12 A draw keeps power budget minimal
- Simple two-wire DC connection for quick installation
- Non-LED black design blends into any build
Specifikācijas
| Brand | Zyvpee |
|---|---|
| Series | AFB03512HA |
| Model | AFB03512HA |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 35mm |
| Bearing Type | Ball |
| Power Connector | 2 Wires |
| Color | Black |
| LED | Non-LED |
| Features | DC Cooling FAN |
| Dimensions | 35*10mm |
Jautājumi par šo preci
Does my case have a 35 mm mounting hole for this fan?
The fan measures 35 mm square and 10 mm thick, so your case must provide a 35 mm mounting pattern with at least 10 mm clearance.
Can I plug the 2-wire connector into a standard 3-pin or 4-pin motherboard header?
Yes, the 2-wire plug fits a 3-pin or 4-pin header; the missing tachometer wire means the board will not report fan speed.
How do I verify the AFB03512HA is running after installation?
With 12 V applied you should hear the ball-bearing rotor spin and feel airflow from the 35 mm frame.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001048BTC
Krājumā