暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 35mm square case fan, 10mm thick, two wires

Zyvpee

Zyvpee AFB03512HA 35mm 12V 0.12A 2-wire case fan

SKU CH-R5QN-9Z901

A 35 mm ball-bearing case fan running at 12 V and 0.12 A with a two-wire power connector

  • TypeCase Fan
  • CompatibilityCase
  • Fan Size35mm
  • Bearing TypeBall
  • Power Connector2 Wires
  • ColorBlack
  • Ultra-compact 35 mm footprint fits tight chassis spaces
  • Ball-bearing motor ensures long-life operation at 12 V
  • Low 0.12 A draw keeps power budget minimal
  • Simple two-wire DC connection for quick installation
  • Non-LED black design blends into any build

Compact 35 mm case fan

The Zyvpee AFB03512HA is a 35 mm square DC fan designed for tight case clearances. It runs on 12 V and draws 0.12 A through a two-wire power connector. Ball-bearing construction supports continuous operation in small-form-factor builds.

Suits space-constrained builds.

This fan fits builders replacing a 35 mm unit or adding spot cooling where only a 35 mm frame fits. The two-wire design means speed cannot be PWM-controlled, so buyers who need motherboard fan-curve management should look elsewhere. It also lacks LED lighting for illuminated builds.

35 mm frame with 10 mm depth

The physical footprint is 35 mm by 35 mm with a 10 mm thickness, matching the 35*10 mm specification. Verify that your chassis or heatsink mounting holes accept this exact frame size before ordering.

特長

  • Ultra-compact 35 mm footprint fits tight chassis spaces
  • Ball-bearing motor ensures long-life operation at 12 V
  • Low 0.12 A draw keeps power budget minimal
  • Simple two-wire DC connection for quick installation
  • Non-LED black design blends into any build

仕様

BrandZyvpee
SeriesAFB03512HA
ModelAFB03512HA
TypeCase Fan
CompatibilityCase
Fan Size35mm
Bearing TypeBall
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Cooling FAN
Dimensions35*10mm

この商品に関する質問

Does my case have a 35 mm mounting hole for this fan?

The fan measures 35 mm square and 10 mm thick, so your case must provide a 35 mm mounting pattern with at least 10 mm clearance.

Can I plug the 2-wire connector into a standard 3-pin or 4-pin motherboard header?

Yes, the 2-wire plug fits a 3-pin or 4-pin header; the missing tachometer wire means the board will not report fan speed.

How do I verify the AFB03512HA is running after installation?

With 12 V applied you should hear the ball-bearing rotor spin and feel airflow from the 35 mm frame.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。