Zyvpee
Zyvpee GM1207PKVX-A 70x20mm 3-pin 12V 2.2W case fan
A 70×20 mm ball-bearing fan that spins at 1600–1999 RPM on 12 V and draws 2.2 W through a three-pin connector
- TypeCPU Cooler Fan
- Bearing TypeBall
- RPM1600-1999 RPM
- Power Connector3 Pin
- ColorBlack
- LEDNon-LED
- 12 V 2.2 W low power draw for efficient cooling
- 3-pin connector enables simple motherboard control
- Ball bearing rated for long service life
- 70 mm × 20 mm slim frame fits tight chassis spaces
- 1600–1999 RPM range delivers focused CPU airflow
Compact 70 mm frame for tight builds
The Zyvpee GM1207PKVX-A is a 70 x 20 mm case fan built for small-form-factor chassis or CPU coolers that demand a slim profile. It targets system integrators and DIY builders who need directed airflow in restricted space without LED lighting.
12 V 2.2 W motor with ball bearing
Running at 12 V and 2.2 W, the fan spins between 1600 and 1999 RPM to move air through heatsinks or tight vent paths. The ball bearing supports continuous operation, though the fixed speed range limits low-noise tuning and maximum static pressure in dense fin stacks.
Three-pin DC control only
The three-pin connector supplies power and tachometer feedback but lacks PWM duty-cycle control, so speed varies only with voltage changes. Builders who require motherboard-managed PWM curves or software-defined fan profiles will find this interface insufficient.
Priekšrocības
- 12 V 2.2 W low power draw for efficient cooling
- 3-pin connector enables simple motherboard control
- Ball bearing rated for long service life
- 70 mm × 20 mm slim frame fits tight chassis spaces
- 1600–1999 RPM range delivers focused CPU airflow
Specifikācijas
| Brand | Zyvpee |
|---|---|
| Series | GM1207PKVX-A |
| Model | GM1207PKVX-A |
| Type | CPU Cooler Fan |
| Bearing Type | Ball |
| RPM | 1600-1999 RPM |
| Power Connector | 3 Pin |
| Color | Black |
| LED | Non-LED |
| Features | CPU Cooling Fan |
| Dimensions | 70*20MM |
Jautājumi par šo preci
Will the 70 mm frame and 3-pin connector fit the same mounting holes and header as my existing 7020 fan?
Yes, the 70×20 mm dimensions and standard 3-pin 12 V connector match the 7020 form factor, so it drops into the same screw holes and motherboard header.
How can I verify the ball-bearing fan is running at the correct speed after installation?
Check the RPM reading in BIOS or monitoring software; it should report between 1600 and 1999 RPM under load.
Does the package include mounting screws or a 3-pin to 4-pin adapter, or must I supply them?
The fan ships only as the bare 70 mm unit; screws and any adapter cables are not included and must be sourced separately.
Arī šajā sadaļā
Klienti arī salīdzināja
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.0000105BTC
Krājumā