Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 70mm square case fan 20mm thick 3pin nonLED

Zyvpee

Zyvpee GM1207PKVX-A 70x20mm 3-pin 12V 2.2W case fan

SKU CH-18YJ-J7VA0

A 70×20 mm ball-bearing fan that spins at 1600–1999 RPM on 12 V and draws 2.2 W through a three-pin connector

  • TypeCPU Cooler Fan
  • Bearing TypeBall
  • RPM1600-1999 RPM
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 2.2 W low power draw for efficient cooling
  • 3-pin connector enables simple motherboard control
  • Ball bearing rated for long service life
  • 70 mm × 20 mm slim frame fits tight chassis spaces
  • 1600–1999 RPM range delivers focused CPU airflow

Compact 70 mm frame for tight builds

The Zyvpee GM1207PKVX-A is a 70 x 20 mm case fan built for small-form-factor chassis or CPU coolers that demand a slim profile. It targets system integrators and DIY builders who need directed airflow in restricted space without LED lighting.

12 V 2.2 W motor with ball bearing

Running at 12 V and 2.2 W, the fan spins between 1600 and 1999 RPM to move air through heatsinks or tight vent paths. The ball bearing supports continuous operation, though the fixed speed range limits low-noise tuning and maximum static pressure in dense fin stacks.

Three-pin DC control only

The three-pin connector supplies power and tachometer feedback but lacks PWM duty-cycle control, so speed varies only with voltage changes. Builders who require motherboard-managed PWM curves or software-defined fan profiles will find this interface insufficient.

Puncte forte

  • 12 V 2.2 W low power draw for efficient cooling
  • 3-pin connector enables simple motherboard control
  • Ball bearing rated for long service life
  • 70 mm × 20 mm slim frame fits tight chassis spaces
  • 1600–1999 RPM range delivers focused CPU airflow

Specificații

BrandZyvpee
SeriesGM1207PKVX-A
ModelGM1207PKVX-A
TypeCPU Cooler Fan
Bearing TypeBall
RPM1600-1999 RPM
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesCPU Cooling Fan
Dimensions70*20MM

Întrebări despre acest articol

Will the 70 mm frame and 3-pin connector fit the same mounting holes and header as my existing 7020 fan?

Yes, the 70×20 mm dimensions and standard 3-pin 12 V connector match the 7020 form factor, so it drops into the same screw holes and motherboard header.

How can I verify the ball-bearing fan is running at the correct speed after installation?

Check the RPM reading in BIOS or monitoring software; it should report between 1600 and 1999 RPM under load.

Does the package include mounting screws or a 3-pin to 4-pin adapter, or must I supply them?

The fan ships only as the bare 70 mm unit; screws and any adapter cables are not included and must be sourced separately.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.