Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 40 by 10 millimetre case fan with maglev bearing and two wires

Zyvpee

Zyvpee HA40101V4-000U-999 40x10mm 12V 0.8W 2-pin Maglev case fan

SKU CH-M9VZ-6YARM

A 40 mm by 10 mm maglev case fan running at up to 1600 RPM on 12 V and 0.8 W

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.8 W draw keeps power use low
  • 40 mm × 10 mm frame fits tight router or switch slots
  • 2-pin connector offers simple, direct power connection
  • Under 1600 RPM speed balances airflow with low noise

Compact 40 mm Maglev fan for tight spaces

This Zyvpee HA40101V4-000U-999 case fan measures 40 by 10 mm and runs on 12 V at 0.8 W. Its maglev bearing keeps noise low while spinning below 1600 RPM. The two-pin connector provides simple power without speed reporting. No LEDs are fitted, so the all-black frame stays unobtrusive in any build.

Ideal for routers switches and small enclosures

Installers fitting networking gear or compact industrial chassis will appreciate the slim profile and straightforward wiring. The fixed-speed design suits always-on cooling where constant airflow is preferred. Users who need PWM control, higher static pressure or mounting holes for larger frame sizes should consider other options.

40 by 10 mm mounting footprint

The physical dimensions of 40 mm by 10 mm are the single specification that determines whether this fan fits your device. Verify the screw-hole spacing and available depth before purchase.

Priekšrocības

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.8 W draw keeps power use low
  • 40 mm × 10 mm frame fits tight router or switch slots
  • 2-pin connector offers simple, direct power connection
  • Under 1600 RPM speed balances airflow with low noise

Specifikācijas

BrandZyvpee
SeriesHA40101V4-000U-999
ModelHA40101V4-000U-999
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Features4CM Cooling Fan
Dimensions40*10MM

Jautājumi par šo preci

What power connector must my device provide for this 2-pin fan?

The fan uses a 2-pin connector and requires a 12 V supply rated for at least 0.8 W.

Will the 40 mm by 10 mm frame fit the mounting holes on my older router or switch?

The fan measures 40 mm square by 10 mm thick, matching the standard 4010 footprint used on many legacy network devices.

How can I confirm the Maglev bearing is spinning correctly after installation?

Power the unit and listen for smooth, quiet rotation; the Maglev design should run without rattling up to the rated 1600 RPM.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.