Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Small black 40 by 10 millimetre case fan with maglev bearing and two wires

Zyvpee

Zyvpee HA40101V4-000U-999 40x10mm 12V 0.8W 2-pin Maglev case fan

SKU CH-M9VZ-6YARM

A 40 mm by 10 mm maglev case fan running at up to 1600 RPM on 12 V and 0.8 W

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeMaglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.8 W draw keeps power use low
  • 40 mm × 10 mm frame fits tight router or switch slots
  • 2-pin connector offers simple, direct power connection
  • Under 1600 RPM speed balances airflow with low noise

Compact 40 mm Maglev fan for tight spaces

This Zyvpee HA40101V4-000U-999 case fan measures 40 by 10 mm and runs on 12 V at 0.8 W. Its maglev bearing keeps noise low while spinning below 1600 RPM. The two-pin connector provides simple power without speed reporting. No LEDs are fitted, so the all-black frame stays unobtrusive in any build.

Ideal for routers switches and small enclosures

Installers fitting networking gear or compact industrial chassis will appreciate the slim profile and straightforward wiring. The fixed-speed design suits always-on cooling where constant airflow is preferred. Users who need PWM control, higher static pressure or mounting holes for larger frame sizes should consider other options.

40 by 10 mm mounting footprint

The physical dimensions of 40 mm by 10 mm are the single specification that determines whether this fan fits your device. Verify the screw-hole spacing and available depth before purchase.

Poudarki

  • Maglev bearing reduces friction for quieter operation
  • 12 V 0.8 W draw keeps power use low
  • 40 mm × 10 mm frame fits tight router or switch slots
  • 2-pin connector offers simple, direct power connection
  • Under 1600 RPM speed balances airflow with low noise

Specifikacije

BrandZyvpee
SeriesHA40101V4-000U-999
ModelHA40101V4-000U-999
TypeCase Fan
CompatibilityCase
Bearing TypeMaglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
Features4CM Cooling Fan
Dimensions40*10MM

Vprašanja o tem izdelku

What power connector must my device provide for this 2-pin fan?

The fan uses a 2-pin connector and requires a 12 V supply rated for at least 0.8 W.

Will the 40 mm by 10 mm frame fit the mounting holes on my older router or switch?

The fan measures 40 mm square by 10 mm thick, matching the standard 4010 footprint used on many legacy network devices.

How can I confirm the Maglev bearing is spinning correctly after installation?

Power the unit and listen for smooth, quiet rotation; the Maglev design should run without rattling up to the rated 1600 RPM.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.