Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Tiny black 25 mm square Meglev fan with two wires

Zyvpee

Zyvpee KD0502PEV1-8 25mm 5V case fan

SKU CH-QFYJ-TCPGW MPN KD0502PEV1-8

Compact 25 mm 5 V Meglev fan spins below 1600 RPM with a two-wire connector

  • TypeCPU Cooler Fan
  • Fan Size25mm
  • Bearing TypeMeglev
  • RPM<1600 RPM
  • Power Connector2 Pin
  • ColorBlack
  • Ultra-slim 25 mm profile fits tight notebook spaces
  • Meglev bearing runs below 1600 RPM for quiet operation
  • Low 0.8 W draw at 5 V saves battery life
  • Simple 2-wire 3-pin connector enables quick installation
  • Non-LED black design keeps builds clean and distraction-free

Compact 5 V slim fan

The Zyvpee KD0502PEV1-8 is a 25 mm square, 6 mm thick case fan that runs on 5 V DC and draws 0.8 W. Its two-wire, three-pin connector suits notebook-style headers and tight internal layouts. The black, non-LED frame keeps the visual profile neutral for any build.

Meglev bearing and low profile

A Meglev bearing reduces mechanical contact, helping the fan stay quiet while spinning up to 1600 RPM. The 25 × 25 × 6 mm footprint fits slim chassis, mini-ITX boards and laptop-style coolers where standard 25 mm fans are too tall. Two-pin power means speed is voltage-controlled rather than PWM-regulated.

Replaces thicker 5 V axial fans

Swapping a taller 5 V axial fan for this 6 mm unit recovers clearance for memory modules, VRM heatsinks or cable routing. The upgrade is worthwhile when the original fan vibrates, whines or no longer spins freely and the header supplies 5 V on two pins. Builders needing PWM control or higher static pressure should look elsewhere.

Priekšrocības

  • Ultra-slim 25 mm profile fits tight notebook spaces
  • Meglev bearing runs below 1600 RPM for quiet operation
  • Low 0.8 W draw at 5 V saves battery life
  • Simple 2-wire 3-pin connector enables quick installation
  • Non-LED black design keeps builds clean and distraction-free

Specifikācijas

BrandZyvpee
SeriesKD0502PEV1-8
ModelKD0502PEV1-8 MS.N
TypeCPU Cooler Fan
Fan Size25mm
Bearing TypeMeglev
RPM<1600 RPM
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesMini Cooling
Dimensions25*06MM

Jautājumi par šo preci

What does the 5 V two-wire connector limit in practice?

The 5 V two-wire connector supplies power only, so speed is fixed at the rated level and cannot be adjusted by the motherboard.

What clearance does the 25 mm square by 6 mm thick frame require?

The fan needs a 25 mm by 25 mm mounting area with at least 6 mm of vertical clearance for the frame.

How is the Meglev bearing fan installed, and what step is often missed?

Connect the two power wires to a 5 V header, secure the 25 mm frame with screws, and verify the airflow direction arrows point the right way.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.