Zyvpee
Zyvpee KD0502PEV1-8 25mm 5V case fan
Compact 25 mm 5 V Meglev fan spins below 1600 RPM with a two-wire connector
- TypeCPU Cooler Fan
- Fan Size25mm
- Bearing TypeMeglev
- RPM<1600 RPM
- Power Connector2 Pin
- ColorBlack
- Ultra-slim 25 mm profile fits tight notebook spaces
- Meglev bearing runs below 1600 RPM for quiet operation
- Low 0.8 W draw at 5 V saves battery life
- Simple 2-wire 3-pin connector enables quick installation
- Non-LED black design keeps builds clean and distraction-free
Compact 5 V slim fan
The Zyvpee KD0502PEV1-8 is a 25 mm square, 6 mm thick case fan that runs on 5 V DC and draws 0.8 W. Its two-wire, three-pin connector suits notebook-style headers and tight internal layouts. The black, non-LED frame keeps the visual profile neutral for any build.
Meglev bearing and low profile
A Meglev bearing reduces mechanical contact, helping the fan stay quiet while spinning up to 1600 RPM. The 25 × 25 × 6 mm footprint fits slim chassis, mini-ITX boards and laptop-style coolers where standard 25 mm fans are too tall. Two-pin power means speed is voltage-controlled rather than PWM-regulated.
Replaces thicker 5 V axial fans
Swapping a taller 5 V axial fan for this 6 mm unit recovers clearance for memory modules, VRM heatsinks or cable routing. The upgrade is worthwhile when the original fan vibrates, whines or no longer spins freely and the header supplies 5 V on two pins. Builders needing PWM control or higher static pressure should look elsewhere.
Najważniejsze cechy
- Ultra-slim 25 mm profile fits tight notebook spaces
- Meglev bearing runs below 1600 RPM for quiet operation
- Low 0.8 W draw at 5 V saves battery life
- Simple 2-wire 3-pin connector enables quick installation
- Non-LED black design keeps builds clean and distraction-free
Specyfikacja
| Brand | Zyvpee |
|---|---|
| Series | KD0502PEV1-8 |
| Model | KD0502PEV1-8 MS.N |
| Type | CPU Cooler Fan |
| Fan Size | 25mm |
| Bearing Type | Meglev |
| RPM | <1600 RPM |
| Power Connector | 2 Pin |
| Color | Black |
| LED | Non-LED |
| Features | Mini Cooling |
| Dimensions | 25*06MM |
Pytania dotyczące tego produktu
What does the 5 V two-wire connector limit in practice?
The 5 V two-wire connector supplies power only, so speed is fixed at the rated level and cannot be adjusted by the motherboard.
What clearance does the 25 mm square by 6 mm thick frame require?
The fan needs a 25 mm by 25 mm mounting area with at least 6 mm of vertical clearance for the frame.
How is the Meglev bearing fan installed, and what step is often missed?
Connect the two power wires to a 5 V header, secure the 25 mm frame with screws, and verify the airflow direction arrows point the right way.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001048BTC
Dostępny