Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Black 80mm square case fan 25mm thick 2 pin sleeve bearing

Zyvpee

Zyvpee MGA8012HS-A25 80mm case fan 12V .24A 2 Pin

SKU CH-932Y-JQSBT

An 80 mm by 25 mm case fan with a 12 V, 0.24 A two-pin connector and sleeve bearing

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 80 mm frame fits standard case mounts
  • 25 mm depth suits tight clearance slots
  • 12 V .24 A draw keeps power use low
  • Two-pin connector plugs straight into motherboard headers
  • Sleeve bearing runs quietly for everyday cooling

Compact 80 mm case fan for tight builds

This 80 mm square frame fits the standard mounting pattern found in many small-form-factor and legacy chassis. It runs on 12 V at 0.24 A and connects through a simple two-pin header. The sleeve bearing keeps operation quiet enough for office or home-theatre systems. No LEDs mean the fan stays visually neutral inside the case.

Suited for basic airflow upgrades in confined spaces

Builders refreshing an older mini-tower or HTPC case will appreciate the direct 12 V feed and thin 25 mm profile. The two-pin connector offers no speed reporting or PWM control, so enthusiasts who want automatic fan curves or silent idle speeds should consider a different solution. Users needing high static pressure for dense radiators will also find the airflow limited.

Drops into any 80 mm mount with two-pin power

The 80 by 25 mm footprint aligns with standard screw holes, requiring only a free 12 V header on the motherboard or a fan controller. Because it draws just 0.24 A, several units can share a single header through a splitter without overloading the circuit. The black frame and absent lighting leave the interior aesthetic unchanged.

Priekšrocības

  • 80 mm frame fits standard case mounts
  • 25 mm depth suits tight clearance slots
  • 12 V .24 A draw keeps power use low
  • Two-pin connector plugs straight into motherboard headers
  • Sleeve bearing runs quietly for everyday cooling

Specifikācijas

BrandZyvpee
SeriesMGA8012HS-A25
ModelMGA8012HS-A25
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve Bearing
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Cooling Fan
Dimensions80*25mm

Jautājumi par šo preci

Does my case have an 80 mm mounting area and a 12 V two-pin header for this fan?

The fan measures 80 by 25 mm and draws 0.24 A from a standard 12 V two-pin connector, so your case needs matching screw holes and a free two-pin header.

Will the sleeve bearing on this 80 mm fan outlast older ball-bearing fans I already run?

Sleeve bearings run quietly at first but typically wear faster than ball bearings, so expect a shorter lifespan if the fan operates continuously at high temperatures.

How can I confirm the MGA8012HS-A25 is spinning correctly after I install it?

Check that the blades rotate smoothly, listen for unusual grinding, and verify the RPM reading in BIOS or fan-control software matches a steady 12 V supply.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.