Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Black 80mm square case fan 25mm thick 2 pin sleeve bearing

Zyvpee

Zyvpee MGA8012HS-A25 80mm case fan 12V .24A 2 Pin

SKU CH-932Y-JQSBT

An 80 mm by 25 mm case fan with a 12 V, 0.24 A two-pin connector and sleeve bearing

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • ColorBlack
  • LEDNon-LED
  • 80 mm frame fits standard case mounts
  • 25 mm depth suits tight clearance slots
  • 12 V .24 A draw keeps power use low
  • Two-pin connector plugs straight into motherboard headers
  • Sleeve bearing runs quietly for everyday cooling

Compact 80 mm case fan for tight builds

This 80 mm square frame fits the standard mounting pattern found in many small-form-factor and legacy chassis. It runs on 12 V at 0.24 A and connects through a simple two-pin header. The sleeve bearing keeps operation quiet enough for office or home-theatre systems. No LEDs mean the fan stays visually neutral inside the case.

Suited for basic airflow upgrades in confined spaces

Builders refreshing an older mini-tower or HTPC case will appreciate the direct 12 V feed and thin 25 mm profile. The two-pin connector offers no speed reporting or PWM control, so enthusiasts who want automatic fan curves or silent idle speeds should consider a different solution. Users needing high static pressure for dense radiators will also find the airflow limited.

Drops into any 80 mm mount with two-pin power

The 80 by 25 mm footprint aligns with standard screw holes, requiring only a free 12 V header on the motherboard or a fan controller. Because it draws just 0.24 A, several units can share a single header through a splitter without overloading the circuit. The black frame and absent lighting leave the interior aesthetic unchanged.

Punti di forza

  • 80 mm frame fits standard case mounts
  • 25 mm depth suits tight clearance slots
  • 12 V .24 A draw keeps power use low
  • Two-pin connector plugs straight into motherboard headers
  • Sleeve bearing runs quietly for everyday cooling

Caratteristiche tecniche

BrandZyvpee
SeriesMGA8012HS-A25
ModelMGA8012HS-A25
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve Bearing
Power Connector2 Pin
ColorBlack
LEDNon-LED
FeaturesDC Cooling Fan
Dimensions80*25mm

Domande su questo articolo

Does my case have an 80 mm mounting area and a 12 V two-pin header for this fan?

The fan measures 80 by 25 mm and draws 0.24 A from a standard 12 V two-pin connector, so your case needs matching screw holes and a free two-pin header.

Will the sleeve bearing on this 80 mm fan outlast older ball-bearing fans I already run?

Sleeve bearings run quietly at first but typically wear faster than ball bearings, so expect a shorter lifespan if the fan operates continuously at high temperatures.

How can I confirm the MGA8012HS-A25 is spinning correctly after I install it?

Check that the blades rotate smoothly, listen for unusual grinding, and verify the RPM reading in BIOS or fan-control software matches a steady 12 V supply.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.