Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Small black 60 by 25 mm blower fan with 3-pin connector

Zyvpee

Zyvpee TYF400FJ16 D06F-12BS1 60*25mm 12V 0.33A 3-pin blower case fan

SKU CH-2D4E-NW5AB

A 60 by 25 millimetre DC blower fan with a 12 volt, 0.33 amp three-pin connector for CPU cooler compatibility

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing Type1 Ball, 1 Sleeve
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60×25 mm blower fits tight CPU coolers
  • 12 V 0.33 A draw keeps power use low
  • Dual ball-and-sleeve bearing reduces friction noise
  • Standard 3-pin connector works with most headers
  • Non-LED black finish suits stealth builds

Compact blower for tight builds

The Zyvpee TYF400FJ16 is a 60 by 25 millimetre DC blower that runs on 12 volts and draws zero point three three amps. Its three pin connector fits standard motherboard headers and the black frame carries no lighting. The mixed ball and sleeve bearing aims to balance noise with service life in confined spaces.

Straightforward three pin mounting

Installation only requires aligning the three pin plug with a compatible header and securing the 60 millimetre frame with standard screws. The blower layout pushes air through a narrow outlet so orientation matters; reversing the flow will starve the target component. The short lead can reach tight headers but offers no slack for routing behind large coolers.

Suits projector and small form factor cooling

This fan serves users who need focused airflow in projector housings or slim chassis where a radial design fits better than an axial alternative. Builders who require PWM speed control, addressable lighting or higher static pressure for dense radiator stacks should look elsewhere.

Priekšrocības

  • Compact 60×25 mm blower fits tight CPU coolers
  • 12 V 0.33 A draw keeps power use low
  • Dual ball-and-sleeve bearing reduces friction noise
  • Standard 3-pin connector works with most headers
  • Non-LED black finish suits stealth builds

Specifikācijas

SeriesTYF400FJ16
ModelTYF400FJ16
TypeCase Fan
CompatibilityCPU Cooler
Bearing Type1 Ball, 1 Sleeve
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions60*25mm

Jautājumi par šo preci

How can I confirm the Zyvpee TYF400FJ16 blower is spinning correctly after installation?

Connect the 3-pin header to the motherboard, power on the system, and verify the fan RPM appears in BIOS or monitoring software; the blower should draw 0.33A at 12Vdc.

What comes in the box with the Zyvpee TYF400FJ16 and what must I purchase separately?

The package includes the 60x25mm blower fan with a pre-attached 3-pin cable; mounting screws and a 3-pin to 4-pin adapter are not included and must be bought separately if required.

Which version of the Zyvpee TYF400FJ16 should I choose for a 12V 3-pin header?

The D06F-12BS1 model is the 12Vdc 0.33A 3-pin variant; select this version when your header supplies 12 volts and uses a standard 3-pin connection.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.