暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small black 60 by 25 mm blower fan with 3-pin connector

Zyvpee

Zyvpee TYF400FJ16 D06F-12BS1 60*25mm 12V 0.33A 3-pin blower case fan

SKU CH-2D4E-NW5AB

A 60 by 25 millimetre DC blower fan with a 12 volt, 0.33 amp three-pin connector for CPU cooler compatibility

  • TypeCase Fan
  • CompatibilityCPU Cooler
  • Bearing Type1 Ball, 1 Sleeve
  • Power Connector3 Pin
  • ColorBlack
  • LEDNon-LED
  • Compact 60×25 mm blower fits tight CPU coolers
  • 12 V 0.33 A draw keeps power use low
  • Dual ball-and-sleeve bearing reduces friction noise
  • Standard 3-pin connector works with most headers
  • Non-LED black finish suits stealth builds

Compact blower for tight builds

The Zyvpee TYF400FJ16 is a 60 by 25 millimetre DC blower that runs on 12 volts and draws zero point three three amps. Its three pin connector fits standard motherboard headers and the black frame carries no lighting. The mixed ball and sleeve bearing aims to balance noise with service life in confined spaces.

Straightforward three pin mounting

Installation only requires aligning the three pin plug with a compatible header and securing the 60 millimetre frame with standard screws. The blower layout pushes air through a narrow outlet so orientation matters; reversing the flow will starve the target component. The short lead can reach tight headers but offers no slack for routing behind large coolers.

Suits projector and small form factor cooling

This fan serves users who need focused airflow in projector housings or slim chassis where a radial design fits better than an axial alternative. Builders who require PWM speed control, addressable lighting or higher static pressure for dense radiator stacks should look elsewhere.

特長

  • Compact 60×25 mm blower fits tight CPU coolers
  • 12 V 0.33 A draw keeps power use low
  • Dual ball-and-sleeve bearing reduces friction noise
  • Standard 3-pin connector works with most headers
  • Non-LED black finish suits stealth builds

仕様

SeriesTYF400FJ16
ModelTYF400FJ16
TypeCase Fan
CompatibilityCPU Cooler
Bearing Type1 Ball, 1 Sleeve
Power Connector3 Pin
ColorBlack
LEDNon-LED
FeaturesDC Blower
Dimensions60*25mm

この商品に関する質問

How can I confirm the Zyvpee TYF400FJ16 blower is spinning correctly after installation?

Connect the 3-pin header to the motherboard, power on the system, and verify the fan RPM appears in BIOS or monitoring software; the blower should draw 0.33A at 12Vdc.

What comes in the box with the Zyvpee TYF400FJ16 and what must I purchase separately?

The package includes the 60x25mm blower fan with a pre-attached 3-pin cable; mounting screws and a 3-pin to 4-pin adapter are not included and must be bought separately if required.

Which version of the Zyvpee TYF400FJ16 should I choose for a 12V 3-pin header?

The D06F-12BS1 model is the 12Vdc 0.33A 3-pin variant; select this version when your header supplies 12 volts and uses a standard 3-pin connection.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。