Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green rectangular circuit board with gold edge connectors and black memory chips on both sides

A-Tech

A-Tech 16GB DDR4 2133 ECC RDIMM 2Rx8 1.2V 288-Pin server RAM

SKU CH-QKRQ-CR515

A 16 GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency and 1.2 V for server and workstation memory upgrades

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 16GB

  • 16 GB ECC registered memory protects data integrity in servers
  • 2133 MHz DDR4 speed accelerates workload throughput
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 2 V standard voltage reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server platforms

Server memory upgrade

This 16 GB DDR4 module runs at 2133 MHz with a CAS latency of 15 and operates at 1.2 V. It uses a 288-pin RDIMM form factor with ECC and registered buffering for error correction in multi-socket environments.

Suited for DDR4 servers and workstations

The dual-rank x8 organisation requires platforms that support registered ECC memory; it will not function in standard desktop or laptop systems that accept only unbuffered non-ECC modules.

Simple slot insertion

Align the notch with the motherboard key and press until the latches click. Common issues include mixing registered and unbuffered DIMMs, populating slots in the wrong channel order, or installing in consumer boards that lack ECC support.

Ciri-ciri utama

  • 16 GB ECC registered memory protects data integrity in servers
  • 2133 MHz DDR4 speed accelerates workload throughput
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 2 V standard voltage reduces power draw per module
  • 288-pin RDIMM form factor fits compatible server platforms

Spesifikasi

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 16GB 2Rx8 PC4-2133P-R
Part NumberAT16G1D4D2133RD8N12V
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Multi-channel KitSingle Module
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

Does this 288-pin DDR4 ECC RDIMM require a server or workstation motherboard that supports registered memory?

Yes, this module is an ECC RDIMM designed for DDR4 servers and workstations only; it will not work in desktop or laptop systems that accept unbuffered memory.

If I add this 2Rx8 dual-rank module to a system that already has single-rank DDR4 2133 RDIMMs, will it run at the same speed?

The module runs at DDR4 2133 with CL15 latency at 1.20 V; the memory controller will typically clock all installed DIMMs to the lowest common speed and timing.

How can I confirm the module is operating as ECC registered memory after installation?

Check the system BIOS or a hardware utility such as dmidecode; it should report the DIMM as 16 GB DDR4 2133 registered ECC with a 2Rx8 organisation.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.