Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Three square 120mm RGB case fans with dual light loops and black frames

anidees

anidees AI Aureola Duo 120mm 3pcs RGB PWM case fan

SKU CH-G8HV-FGQWQ

Three 120 mm PWM fans deliver 35.2 CFM airflow at 1500 RPM with 24.8 dBA noise, dual-loop addressable RGB lighting, rifle bearings and anti-vibration pads

  • Fan Counts3 Fans
  • TypeCase Fan
  • Fan Thickness25mm
  • Bearing TypeRifle
  • RPM1500 rpm ± 10%
  • Air Flow35.2 CFM
  • Dual light loops with 18 independent RGB LEDs per fan
  • 2 CFM airflow at 1500 RPM for strong cooling
  • 8 dBA noise level with rifle bearing and rubber pads
  • PWM speed control via motherboard or included remote
  • 5V 3-pin addressable RGB sync with major motherboard software

Triple 120mm ARGB fan kit

The anidees AI Aureola Duo pack contains three 120mm PWM case fans, each 25mm thick and fitted with a rifle bearing. Eighteen addressable RGB LEDs per fan are arranged in dual light loops, driven from a 5V 3-pin header. A bundled 1-to-8 hub and RF remote let you set speed and lighting without opening the chassis.

Builders who want synchronised ARGB

The kit suits systems with a 5V 3-pin addressable RGB header and a 4-pin PWM header for motherboard control via ASUS Aura Sync, MSI Mystic Light Sync or GIGABYTE RGB Fusion 2.0. It does not work with 12V 4-pin RGB headers, so boards lacking a 5V 3-pin connector cannot drive the lighting. The remote disables fan control when the hub is linked to the motherboard.

Hub-powered PWM fans with vibration damping

Eight silicone pads on each frame reduce vibration transmitted to the case. The hub draws 12V power and distributes PWM signals to all three fans, which spin up to 1500 rpm ± 10% for 35.2 CFM airflow and 1.04 mm H₂O static pressure at 24.8 dBA. A 4.5V starting voltage ensures reliable spin-up at low speeds.

Ciri-ciri utama

  • Dual light loops with 18 independent RGB LEDs per fan
  • 2 CFM airflow at 1500 RPM for strong cooling
  • 8 dBA noise level with rifle bearing and rubber pads
  • PWM speed control via motherboard or included remote
  • 5V 3-pin addressable RGB sync with major motherboard software

Spesifikasi

BrandAnidees
SeriesAI Aureola Duo
Part NumberAI-AR-DUO12
Fan Counts3 Fans
TypeCase Fan
Fan Thickness25mm
Bearing TypeRifle
RPM1500 rpm ± 10%
Air Flow35.2 CFM
Noise Level24.8 dBA
Dimensions120 x 120 x 25mm

Soalan tentang produk ini

Does my motherboard need a 5 V 3-pin addressable RGB header for the lighting to work?

Yes, the fans require a 5 V 3-pin addressable RGB header; they are not compatible with 12 V 4-pin RGB headers.

Will the included RF remote still control fan speed if I connect the hub to my motherboard?

No, the remote fan-speed function is disabled once the hub is connected to the motherboard PWM header.

How can I verify the fans are running at the correct speed after installation?

Check the RPM reading in BIOS or monitoring software; each fan should report around 1500 rpm ± 10 %.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.