Athena Power
Athena Power AP-PS2MK12P868 1200W server power supply
Delivers 1200W continuous power with 92% Platinum efficiency, ATX 3.1 and PCIe 5.0 compliance, a 600W 12V-2x6 GPU connector, dual smart fans, low ripple.
- TypeATX
- Single/RedundantSingle
- Maximum Power1200W
- Fans2
- Main Connector20+4Pin
- Output Current+3.3V@18A, +5V@18A,+12V@100A, [email protected] , [email pro
- 1200W continuous output powers demanding servers and workstations
- 80 PLUS Platinum certification delivers up to 92% efficiency at typical loads
- ATX 3.1 and PCIe 5.0 compliance ensures next-generation hardware compatibility
- 12V-2x6 (H++) connector supplies 600W to modern GPUs safely
- Dual smart fans with thermal speed control maintain quiet, stable cooling
Built for high-output servers and GPU workstations
This 1200W single PS2 unit carries 80 PLUS Platinum certification and meets ATX 3.1 with PCIe 5.0 specifications. A 12V-2x6 connector rated at 600W feeds modern graphics cards used in AI, rendering and HPC clusters. Dual smart fans adjust speed to thermal load while low ripple protects sensitive audio or measurement circuits.
Replaces older Platinum
The jump is worth it when your GPU demands the new connector or when efficiency at 92% cuts heat in a densely packed rack. Systems still running on legacy 6+2 pin cables or without ATX 3.1 compliance will not benefit from the updated power delivery. Buyers who need redundant hot-swap supplies should look elsewhere.
Standard PS2 dimensions fit common server chassis
Mounting uses the usual four-screw pattern; the 100-240V auto-ranging input removes voltage-setup errors. The 17ms hold-up time bridges brief mains dips. Mis-routing the single EPS 8-pin and 4+4 cables can starve a dual-CPU board, so verify the motherboard layout before closing the case.
Ciri-ciri utama
- 1200W continuous output powers demanding servers and workstations
- 80 PLUS Platinum certification delivers up to 92% efficiency at typical loads
- ATX 3.1 and PCIe 5.0 compliance ensures next-generation hardware compatibility
- 12V-2x6 (H++) connector supplies 600W to modern GPUs safely
- Dual smart fans with thermal speed control maintain quiet, stable cooling
Spesifikasi
| Brand | Athena Power |
|---|---|
| Series | PS2 |
| Model | AP-PS2MK12P868 |
| Type | ATX |
| Single/Redundant | Single |
| Maximum Power | 1200W |
| Fans | 2 |
| Main Connector | 20+4Pin |
| Output Current | +3.3V@18A, +5V@18A,+12V@100A, [email protected] , [email protected] |
| Output | +3.3V, +5V,12V, -12V, +5Vsb |
| Input Voltage | 100 - 240 V |
| Input Frequency Range | 47 - 63 Hz |
| Input Current | 13A@110V, 6A@ 240V |
| MTBF | 100,000 Hours on Maximum Load at +25 degree C |
| Efficiency | > =92% |
| Hold-up Time | 17 ms Minimum at Nominal Input Voltage |
| Protection | OCP, OVP, |
| Features | Rise time: Less than 20 ms |
| Dimensions | (L x W x H) 158 x 150 x 86 mm / 6.22 x 5.9 x 3.4 in |
| Weight | 5.0 lbs |
| Humidity | 20%-90% |
| Temperature | Operating: 0°C ~ +50°C on Full Load; Storage & Shipping: -20°C ~ +80°C |
Soalan tentang produk ini
Does the 158 mm length and 150 mm width fit a standard PS2 chassis?
Yes, the unit measures 158 x 150 x 86 mm, matching the standard PS2 form factor used in most server and workstation chassis.
How do I connect the 12V-2x6 GPU cable correctly, and what mistake should I avoid?
Plug the 12V-2x6 (H++) 600W connector fully into the GPU until it clicks; do not use the PCIe 6+2-pin cables for the 12V-2x6 port as they are not interchangeable.
When should I expect to replace the dual smart fans?
The MTBF is rated at 100,000 hours at maximum load and 25 °C; fan lifespan varies with temperature and duty cycle, so monitor noise and RPM for early wear signs.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



