Brute Networks
Brute Networks 32GB DDR4-2400 PC4-19200 2Rx4 1.2V CL15 Registered RDIMM
32 GB DDR4-2400 registered ECC server memory module with CL15 latency and 1.2 V operation
- Capacity32GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 32 GB capacity supports demanding server workloads
- DDR4-2400 speed delivers 19200 MB/s bandwidth
- Registered design with ECC protects data integrity
- 2 V operation reduces power consumption
- Cisco compatible module validated for UCS systems
32 GB Registered DDR4 for Cisco Servers
This module delivers 32 GB of DDR4-2400 registered ECC memory built for Cisco UCS platforms. It targets administrators who need to expand capacity in validated servers without buying OEM-labelled sticks.
Capacity and headroom at 2400 MT/s
The single 32 GB rank lets a compatible chassis reach higher totals with fewer slots occupied. Systems that require faster data rates or lower latency than CL15 will not benefit from this module.
Replaces Cisco UCS-MR-1X322RV-A
It upgrades from smaller registered DIMMs when slot count is limited and the platform supports PC4-19200 speeds. The jump is not worthwhile for boards restricted to lower densities or unbuffered memory.
Ciri-ciri utama
- 32 GB capacity supports demanding server workloads
- DDR4-2400 speed delivers 19200 MB/s bandwidth
- Registered design with ECC protects data integrity
- 2 V operation reduces power consumption
- Cisco compatible module validated for UCS systems
Spesifikasi
| Brand | Cisco |
|---|---|
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
Soalan tentang produk ini
Will this 32GB DDR4-2400 CL15 Registered RDIMM work in the same channel as my current DDR4-2400 Registered modules?
The module runs at DDR4-2400 with CL15 latency and 1.20V, matching the JEDEC standard for DDR4-2400 Registered DIMMs; mixing ranks is supported by the memory controller, but the server BIOS determines the final operating speed.
How can I confirm the module is detected at 2400 MT/s with ECC active after installation?
Check the BIOS memory information page or the operating system memory report — both will show 32GB per module, 2400 MT/s data rate, registered operation and ECC enabled if the server is configured correctly.
Does the box contain only the 288-pin RDIMM or are any cables or brackets included?
Only the 32GB 288-pin DDR4 Registered RDIMM is supplied; no cables, brackets or additional hardware are included.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



