Brute Networks
Brute Networks 32GB DDR4-2933 2Rx4 ECC RDIMM 4X77A12185
32GB DDR4-2933 ECC registered RDIMM with 2Rx4 organisation for Lenovo-compatible servers
- Capacity32GB
- Rank2Rx4
- ChipsetMajor Brand Chipset
- 32GB capacity supports memory-intensive server workloads
- DDR4-2933 speed delivers 23400 MT/s data rate
- 2Rx4 dual-rank organisation increases memory density
- ECC registered design detects and corrects data errors
- 100% Lenovo compatible for validated system integration
32GB DDR4-2933 ECC RDIMM
This is a 32GB DDR4-2933 registered DIMM with ECC and a 2Rx4 organisation. It carries the PC4-23400 speed rating and is built to match Lenovo part number 4X77A12185. The module is new and covered by a lifetime warranty from Brute Networks.
Suits servers needing Lenovo-validated memory
This module fits administrators who require guaranteed compatibility with systems that specify the 4X77A12185 part number. The registered design and ECC function target workloads that demand error correction and signal integrity. Builders of consumer desktops or laptops should look elsewhere because those platforms generally cannot use registered ECC memory.
Installs in a compatible DDR4 RDIMM slot
The stick plugs into a standard DDR4 RDIMM socket on a motherboard that supports registered ECC modules at the rated speed. No extra cooling or power connections are required beyond the slot itself. Using matched modules frees the memory controller to run in multi-channel mode for maximum throughput.
Ciri-ciri utama
- 32GB capacity supports memory-intensive server workloads
- DDR4-2933 speed delivers 23400 MT/s data rate
- 2Rx4 dual-rank organisation increases memory density
- ECC registered design detects and corrects data errors
- 100% Lenovo compatible for validated system integration
Spesifikasi
| Brand | Lenovo |
|---|---|
| Capacity | 32GB |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
Soalan tentang produk ini
Does this 32GB DDR4-2933 2Rx4 ECC RDIMM require a server motherboard with registered-DIMM slots and DDR4 support?
Yes, it is a PC4-23400 registered module with ECC and must be installed in a platform that accepts DDR4 RDIMMs.
Can I mix this 2Rx4 module with existing 1Rx4 or 2Rx8 DDR4-2933 RDIMMs in the same channel?
Mixing ranks is possible if the platform’s memory controller supports it, but population rules vary by system; consult the server manual for approved configurations.
How can I verify the module is running at 2933 MT/s with ECC active after installation?
Check the BIOS memory information or use an OS tool such as dmidecode to confirm speed shows 2933 MT/s and ECC status reads enabled.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



