Brute Networks
Brute Networks 64GB DDR4-3200 2Rx4 ECC Registered RDIMM P06035-K21
A 64GB DDR4-3200 ECC registered RDIMM with 2Rx4 organisation and 1.20V operation, fully compatible with HP P06035-K21 systems
- Capacity64GB
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- Rank2Rx4
- ChipsetMajor Brand Chipset
- 64 GB capacity supports memory-intensive server workloads
- DDR4-3200 speed delivers 25600 MT/s data transfer rate
- ECC registered design detects and corrects single-bit errors
- 2Rx4 dual-rank organisation maximises density per DIMM slot
- 20 V operation reduces power draw in dense configurations
64GB DDR4-3200 Registered ECC RDIMM
This 64GB DDR4-3200 module is an HP-compatible 2Rx4 registered ECC RDIMM built for server platforms. It operates at 1.20V and carries a PC4-25600 rating for enterprise workloads. The part is equivalent to HP P06035-K21 and is sold new.
Who this suits and who should look elsewhere
IT teams running HP servers that require registered ECC memory at 3200MT/s will find this module a direct match. Builders needing unbuffered DIMMs, non-ECC memory, or capacities other than 64GB should select a different part.
Deciding specification: 2Rx4 registered ECC
The 2Rx4 registered ECC organisation at 3200MT/s determines platform compatibility. Systems that require unbuffered or single-rank modules will not support this RDIMM. Verify the server memory list before purchase.
Ciri-ciri utama
- 64 GB capacity supports memory-intensive server workloads
- DDR4-3200 speed delivers 25600 MT/s data transfer rate
- ECC registered design detects and corrects single-bit errors
- 2Rx4 dual-rank organisation maximises density per DIMM slot
- 20 V operation reduces power draw in dense configurations
Spesifikasi
| Brand | HP |
|---|---|
| Capacity | 64GB |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
Soalan tentang produk ini
Does the 2Rx4 registered RDIMM require a specific DIMM slot order on my HP server?
Install the module in the slot sequence recommended by your HP server manual; registered DIMMs must populate the correct channels for the memory controller to initialise.
What tool or force is needed to seat the 288-pin DDR4 module?
Align the notch with the slot key, press straight down until both retention clips click — no tools required, but uneven pressure can bend the gold contacts.
When should I plan to replace this 64 GB ECC module?
Replace only if the server logs uncorrectable ECC errors or the module fails POST; otherwise it runs for the system's service life.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



