Brute Networks
Brute Networks 8GB DDR4-2133 CL15 1.2V 2Rx8 Registered RDIMM 288-Pin
8GB registered DDR4 server memory at 2133 MT/s with CL15 latency and ECC
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8GB capacity expands server workloads
- DDR4-2133 speed with CL15 latency
- Registered ECC design protects data integrity
- 20V operation reduces power draw
- 100% Dell H8PGN compatible for guaranteed fit
Dell-compatible server RDIMM
This Brute Networks module is an 8 GB DDR4 registered DIMM built to Dell part number H8PGN. It runs at 2133 MT/s with CL15 latency at 1.20 V and carries ECC protection for data integrity. The 2Rx8 organisation and major-brand chipset meet or exceed the original equipment specifications. It is designed to slot straight into compatible Dell PowerEdge servers.
Suited for admins expanding Dell systems
IT teams extending the life of existing Dell rack or tower servers will find this module a direct fit. Buyers who need higher densities, faster speeds or unbuffered UDIMMs for workstation boards should look at something else. The registered design and specific Dell qualification mean it will not function in consumer motherboards or non-Dell platforms that require different SPD profiles.
Straightforward DIMM installation
Installation follows the standard 288-pin DDR4 procedure: power down, open the chassis, align the key notch and press until the retention clips lock. The most common issue is mixing registered and unbuffered modules in the same channel, which prevents boot. Another frequent error is exceeding the per-slot or per-channel population limits documented in the server’s memory configuration guide.
Ciri-ciri utama
- 8GB capacity expands server workloads
- DDR4-2133 speed with CL15 latency
- Registered ECC design protects data integrity
- 20V operation reduces power draw
- 100% Dell H8PGN compatible for guaranteed fit
Spesifikasi
| Brand | Dell |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Soalan tentang produk ini
Does my Dell server need registered DIMM slots to accept this 288-pin DDR4-2133 RDIMM?
Yes, the module is a registered RDIMM and requires a server motherboard that supports registered DDR4 memory.
Can I mix this CL15 1.20V stick with existing DDR4-2133 RDIMMs that have different latency or voltage?
The server will run all modules at the lowest common speed and highest common voltage; matching CL15 and 1.20V avoids timing conflicts.
How do I confirm the module is recognised at 2133 MT/s with ECC active after installation?
Check the BIOS memory information or run a tool such as dmidecode to verify speed, ECC status and registered operation.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



