Brute Networks
Brute Networks 8GB DDR4-2133 ECC SODIMM 2Rx8 1.20V
8 GB DDR4-2133 ECC SODIMM with CL15 latency and 1.2 V operation for HP-compatible servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- 8 GB capacity expands server memory headroom
- DDR4-2133 speed delivers 17000 MT/s data rate
- ECC protection detects and corrects single-bit errors
- 20 V operation reduces power draw per module
- 2Rx8 dual-rank layout increases memory density per slot
HP Compatible DDR4 Server Memory
This 8 GB DDR4-2133 ECC SODIMM is built for HP servers and workstations that require registered error-correcting memory. It runs at PC4-17000 speed with a CAS latency of 15 and operates at 1.20 V. The module uses a 2Rx8 rank configuration on a 288-pin form factor.
Who This Suits and Who It Does Not
IT teams maintaining HP infrastructure that calls for V1D58AA-equivalent parts will find a direct drop-in replacement. Systems needing higher density, faster frequencies, or registered DIMMs should look at other modules because this stick is limited to 8 GB at 2133 MT/s and is unregistered.
Behaviour Under Sustained Load
Major-brand DRAM from Samsung, SK Hynix or Micron keeps timing stable during long compute jobs. ECC corrects single-bit errors on the fly, preventing data corruption in always-on workloads. The 1.20 V rating limits thermal output inside dense chassis.
Ciri-ciri utama
- 8 GB capacity expands server memory headroom
- DDR4-2133 speed delivers 17000 MT/s data rate
- ECC protection detects and corrects single-bit errors
- 20 V operation reduces power draw per module
- 2Rx8 dual-rank layout increases memory density per slot
Spesifikasi
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Soalan tentang produk ini
Does this 288-pin DDR4 SODIMM fit a standard DDR4 SO-DIMM slot in my HP server?
This module uses a 288-pin DDR4 interface, which is the standard physical connector for DDR4 SODIMMs in compatible HP systems.
Will the 2Rx8 rank and CL15 latency work alongside existing single-rank DDR4-2133 modules?
Mixed-rank configurations are supported on many HP platforms; the module runs at DDR4-2133 CL15 and will down-clock if paired with slower memory.
How can I verify the ECC function is active after installation?
Check the system BIOS or iLO interface — it should report 8 GB of ECC memory with the correct 2Rx8 organisation and 1.20 V operation.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



