Brute Networks
Brute Networks 8GB DDR4-2666 ECC Registered RDIMM 1Rx8 1.2V CL15
8GB DDR4-2666 ECC registered RDIMM with CL15 latency and 1.2V operation for compatible HP servers
- Capacity8GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL15
- Voltage1.20V
- ECCYes
- ECC protection prevents data corruption with registered design
- 2666 MT/s DDR4 speed supports demanding server workloads
- CL15 latency at 1.20 V reduces access delay
- 1Rx8 288-pin layout fits standard DDR4 server slots
- 100 % HP compatible module maintains original service contracts
HP-compatible 8 GB DDR4-2666 registered ECC module
This 288-pin RDIMM adds 8 GB of error-correcting memory to HP servers that accept DDR4-2666 registered DIMMs. It runs at 1.20 V with CL15 latency and uses a single-rank 1Rx8 organisation built from major-brand DRAM chips.
Capacity and headroom for virtualised workloads
Eight gigabytes extends the memory pool for additional virtual machines, larger in-memory databases or heavier application caches. The single 8 GB module fills one slot; total capacity is limited by the number of registered DIMM slots the platform provides.
DDR4-2666 registered interface constraints
The module operates at the DDR4-2666 (PC4-21300) data rate with registered buffering and ECC. Systems that require unbuffered UDIMMs, load-reduced LRDIMMs, or a different DDR generation cannot use this part.
Ciri-ciri utama
- ECC protection prevents data corruption with registered design
- 2666 MT/s DDR4 speed supports demanding server workloads
- CL15 latency at 1.20 V reduces access delay
- 1Rx8 288-pin layout fits standard DDR4 server slots
- 100 % HP compatible module maintains original service contracts
Spesifikasi
| Brand | HP |
|---|---|
| Capacity | 8GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
Soalan tentang produk ini
Will this DDR4-2666 registered ECC RDIMM run stably alongside my existing DDR4-2666 ECC modules?
Yes, it operates at 1.20 V with CL15 latency and registered buffering, matching the electrical and timing profile of standard DDR4-2666 ECC RDIMMs so it can populate free slots in a compatible server.
How can I confirm the module is recognised at its rated DDR4-2666 speed after installation?
Check the BIOS memory information or OS tools such as dmidecode; they should report 2666 MT/s, PC4-21300, 1Rx8 organisation and ECC enabled for the new DIMM.
Does the box contain only the 8 GB RDIMM or are heat spreaders, cables or a carrier tray included?
Only the 288-pin 8 GB DDR4-2666 ECC registered RDIMM is supplied; no heat spreader, cables or carrier tray are included.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



