Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green 168-pin DIMM stick, black memory chips, gold contacts

Computer Memory Solutions

Computer Memory Solutions 256MB PC133 DIMM memory upgrade

SKU CH-DFSC-FE6SW

Adds 256 MB of PC133 SDRAM to compatible HP LaserJet 4600 printers using a 168-pin unbuffered DIMM

  • Capacity256MB
  • SpeedPC 133
  • CAS LatencyCL3
  • Timing3-3-3
  • Voltage3.3V
  • ECCNo
  • 256 MB capacity expands printer memory for larger print jobs
  • PC133 133 MHz speed matches HP LaserJet 4600 series requirements
  • 168-pin DIMM form factor fits the designated memory slot
  • Non-ECC unbuffered design ensures correct operation in compatible printers
  • Major-brand chipset with lifetime warranty from CMS provides long-term reliability

256MB PC133 DIMM for HP LaserJet 4600

This 256MB PC133 SDRAM DIMM upgrades HP LaserJet 4600 series printers including the 4600, 4600Dn, 4600Dtn, 4600Hdn and 4600N. It uses a 168-pin unbuffered design with CL3 timing at 3.3V. The module is built with major-brand chips and carries a limited lifetime warranty from Computer Memory Solutions.

PC133 SDRAM speed and timing limits

The memory runs at 133 MHz with a 3-3-3 CAS latency cycle. PC133 bandwidth caps data throughput for these printers, so complex graphics or heavy print queues will not move faster than the bus allows. Non-ECC operation means single-bit errors are not corrected automatically during long print jobs.

168-pin DIMM build and daily handling

The stick has no heat spreader, so it relies on the printer’s internal airflow. Gold-edge contacts on the 168-pin connector resist oxidation in office environments. Installation is a single-module drop-in; the unbuffered layout keeps the signal path direct for the printer’s memory controller.

Ciri-ciri utama

  • 256 MB capacity expands printer memory for larger print jobs
  • PC133 133 MHz speed matches HP LaserJet 4600 series requirements
  • 168-pin DIMM form factor fits the designated memory slot
  • Non-ECC unbuffered design ensures correct operation in compatible printers
  • Major-brand chipset with lifetime warranty from CMS provides long-term reliability

Spesifikasi

BrandComputer Memory Solutions
Modelcm3264133dimm
Capacity256MB
SpeedPC 133
CAS LatencyCL3
Timing3-3-3
Voltage3.3V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Laserjet 4600, 4600Dn, 4600Dtn, 4600Hdn, 4600N
Package Content1 Memory RAM Stick

Soalan tentang produk ini

Should I pick the 256MB stick or a larger kit for my HP LaserJet 4600?

This single 256MB DIMM matches the printer's supported module size; add one stick per available slot up to the machine's maximum.

Will PC133 133MHz memory actually run at that speed in the LaserJet 4600?

The module is rated 133MHz CL3; the printer's memory controller will operate it at its supported bus speed, which cannot exceed the rated 133MHz.

Does the 168-pin DIMM interface limit bandwidth compared to newer standards?

The 168-pin SDRAM DIMM provides a 64-bit data path at up to 133MHz, delivering the peak throughput the LaserJet 4600 architecture can use.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.