Computer Memory Solutions
Computer Memory Solutions 32GB (4x8GB) DDR3 1333 ECC Registered DIMM for Dell PowerEdge T620 - B103
A 32 GB registered ECC DDR3 kit of four 8 GB DIMMs validated for the Dell PowerEdge T620 server
- Capacity32GB (4 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 32 GB total capacity across four 8 GB modules for server-grade density
- Registered ECC DDR3 1333 MHz with CL9 timing ensures data integrity under load
- 240-pin DIMM form factor designed for Dell PowerEdge T620 quad-channel architecture
- 5 V operation matches platform specification for stable enterprise deployment
- 2Rx4 rank configuration optimises bandwidth across 24 available memory sockets
32GB DDR3-1333 ECC Registered Kit for Dell T620
This 32GB kit contains four 8GB DDR3-1333 ECC Registered DIMMs built for the Dell PowerEdge T620 server. Each module runs at 1.5V with CL9 timing and a 2Rx4 organisation. The 240-pin form factor matches the T620's 24 memory sockets.
Sustained server workloads with ECC protection
Registered buffering reduces electrical load on the memory controller, allowing the T620 to populate all 24 sockets up to 384GB with two CPUs or 768GB using quad-rank modules. ECC corrects single-bit errors in real time, preventing data corruption during continuous operation. The 1333MHz speed maintains stability across fully populated channels without downclocking.
Registered ECC requirement — not compatible
The T620 firmware requires Registered ECC modules; mixing Registered and Unbuffered ECC DIMMs in the same system is not supported. This kit provides matched 2Rx4 registered sticks for quad-channel operation. Buyers needing Unbuffered ECC or non-ECC memory for other platforms cannot use these modules.
Ciri-ciri utama
- 32 GB total capacity across four 8 GB modules for server-grade density
- Registered ECC DDR3 1333 MHz with CL9 timing ensures data integrity under load
- 240-pin DIMM form factor designed for Dell PowerEdge T620 quad-channel architecture
- 5 V operation matches platform specification for stable enterprise deployment
- 2Rx4 rank configuration optimises bandwidth across 24 available memory sockets
Spesifikasi
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247210600ECCR2R4H |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Dell Poweredge T620 |
| Package Content | 4 Memory RAM Sticks |
Soalan tentang produk ini
How much power does the 1.5 V DDR3-1333 kit draw when the server runs continuously?
Each module operates at 1.5 V; total system draw depends on the T620 configuration and workload, so the kit itself adds only its rated voltage load.
Does the T620 need any specific BIOS setting or firmware revision before installing these four registered ECC DIMMs?
The modules are guaranteed compatible with the PowerEdge T620; no extra hardware is required beyond the server’s 24 DIMM slots and a supported CPU.
Can I mix this 2Rx4 registered kit with the unbuffered ECC DIMMs already in my T620?
Mixing registered and unbuffered ECC modules is not supported in the T620; all populated slots must use the same registered ECC type.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



