Computer Memory Solutions
Computer Memory Solutions CM512648500SODRH 8GB (2x4GB) DDR3 1066MHz CL7 SODIMM iMac 24" Early 2009
8GB DDR3 1066MHz CL7 SODIMM kit upgrades the 24-inch iMac Early 2009 to its 8GB maximum
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1066 (PC3 8500)
- CAS LatencyCL7
- Timing7-7-7
- Voltage1.5V
- 8GB kit upgrades the iMac 24" Early 2009 to its 8GB maximum
- 1066 MHz DDR3 speed matches the factory memory specification exactly
- CL7 CAS latency delivers responsive timing for everyday workloads
- 204-pin SODIMM form factor fits the two available memory slots directly
- 5 V operation keeps power draw within the original design limits
Targeted upgrade for the 24‑inch iMac (Early 2009)
This 8 GB kit (2 × 4 GB) of DDR3‑1066 CL7 SO‑DIMM memory is built specifically for the Apple iMac “Core 2 Duo 2.93 24” Early 2009 (model MB419LL/A, A1225). It matches the original 1.5 V unbuffered, non‑ECC specification so the system recognises the modules without configuration changes.
Fits the two factory SO‑DIMM slots
The iMac ships with 4 GB across two slots; this pair occupies the remaining sockets and brings total memory to the platform maximum of 8 GB. No heat spreader is included, keeping the low‑profile form factor required by the slim all‑in‑one chassis, and the 204‑pin DDR3 interface aligns with the board’s native memory controller.
Replaces the stock 2 GB modules when all four
Builders who have already filled the first two slots with 2 GB sticks can swap them for this 4 GB pair to reach the 8 GB limit in a single step. The upgrade is worthwhile when the machine runs memory‑intensive macOS versions or creative workloads that exceed the original 4 GB; it does not benefit systems that cannot address more than 4 GB total.
Ciri-ciri utama
- 8GB kit upgrades the iMac 24" Early 2009 to its 8GB maximum
- 1066 MHz DDR3 speed matches the factory memory specification exactly
- CL7 CAS latency delivers responsive timing for everyday workloads
- 204-pin SODIMM form factor fits the two available memory slots directly
- 5 V operation keeps power draw within the original design limits
Spesifikasi
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512648500SODRH |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Timing | 7-7-7 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Apple Imac "Core 2 Duo 2.93 24" Early 2009 MB419Ll/A |
| Package Content | 2 Memory RAM Sticks |
Soalan tentang produk ini
Does the DDR3 1066MHz CL7 timing limit bandwidth under sustained workloads?
The kit runs at 1066 MHz with CL7 7-7-7 timing, so sustained throughput is capped by that DDR3 8500 specification.
How much heat or power draw should I expect from these unbuffered SODIMMs running all day?
Each 4 GB module operates at 1.5 V without a heat spreader, so thermal output and power draw are low for typical all-day use.
My iMac currently has two 2 GB sticks installed — do I need to remove them before adding this 2×4 GB kit?
Yes, the system has two slots total and maxes at 8 GB, so the existing modules must be replaced with this pair.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



