Computer Memory Solutions
Computer Memory Solutions CM512723200ECCREG2R4 16GB (4 x 4GB) DDR2 400 ECC Registered DIMM
16 GB kit of four 4 GB DDR2 400 registered ECC DIMMs for Dell Precision Workstation 470N
- Capacity16GB (4 x 4GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 400 (PC2 3200)
- CAS LatencyCL3
- Timing3-3-3
- Voltage1.8V
- 16 GB kit for Dell Precision 470N workstations
- Four 4 GB registered ECC modules for data integrity
- DDR2 400 MHz CL3 timing matches system spec
- 240-pin 1.8 V DIMMs install in matched pairs
- Dual-rank 2Rx4 organisation fills all six slots
System-specific DDR2 kit
This 16 GB kit contains four 4 GB DDR2 400 registered ECC DIMMs built for the Dell Precision Workstation 470N. The modules run at PC2-3200 speed with CL3 timing and 1.8 V operation.
Not for non-ECC or unbuffered systems
Workstations that require unbuffered non-ECC memory cannot use these registered modules. Buyers needing single-rank DIMMs or a different pin count should select another part.
Registered ECC with dual-rank layout
The 2Rx4 registered ECC design is the single specification that determines compatibility with the 470N chipset, which supports a maximum of eight ranks across six sockets.
Ciri-ciri utama
- 16 GB kit for Dell Precision 470N workstations
- Four 4 GB registered ECC modules for data integrity
- DDR2 400 MHz CL3 timing matches system spec
- 240-pin 1.8 V DIMMs install in matched pairs
- Dual-rank 2Rx4 organisation fills all six slots
Spesifikasi
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512723200ECCREG2R4 |
| Capacity | 16GB (4 x 4GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 400 (PC2 3200) |
| CAS Latency | CL3 |
| Timing | 3-3-3 |
| Voltage | 1.8V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | Based on Current Inventory (If Required Please Contact) |
| Compatible System | Dell Precision Workstation 470N |
| Package Content | 1 Memory RAM Stick |
Soalan tentang produk ini
My Dell Precision Workstation 470N has six DIMM slots — can I install this 4 x 4GB kit in any order?
The first DIMM may be populated singly, but additional modules must be installed in matched pairs to satisfy the chipset's rank limit.
Will these registered ECC DDR2 modules work if I keep my existing unbuffered non-ECC sticks in the other slots?
No, the Workstation 470N requires registered ECC memory; mixing registered with unbuffered or ECC with non-ECC will prevent the system from posting.
After installation, how can I confirm the kit is running at DDR2 400 with CL3 timing?
Enter the BIOS or use a utility such as CPU-Z; the memory tab should report 400 MHz, PC2 3200, and 3-3-3 timings for each module.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



