Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk

DUCI

DUCI J15 512GB Green SATA internal SSD

SKU CH-PJZE-XYVQ3

A 2.5-inch SATA internal SSD with 512 GB capacity and sequential read speeds up to 510 MB/s for laptops and desktops

  • Used ForGaming
  • Form Factor2.5-inch
  • ProtocolSATA
  • ConnectorSATA
  • Max Sequential Write376 megabytes_per_second
  • Height4.94 in x 2.76 in x 0.28 in

Style 512GB

  • Sequential reads up to 510 MB/s accelerate boot and load times
  • Sequential writes up to 376 MB/s keep file saves responsive
  • 5-inch SATA 3.0 interface fits laptops and desktops without adapters
  • 7 mm slim profile at .28 in height slides into tight bays
  • 512 GB capacity stores games and work files in one drive

DUCI J15 512GB SATA SSD

The DUCI J15 is a 512GB internal solid-state drive built on the SATA 3.0 interface. It uses a standard 2.5-inch form factor with a 7mm profile and measures 4.94 in x 2.76 in x 0.28 in. Sequential read speeds reach up to 510 MB/s while sequential writes hit 376 MB/s. A quick start guide is included in the package.

Suits laptops and desktops with 2.5-inch SATA bays

This drive fits any notebook or desktop that provides a 2.5-inch SATA connection. The slim 7mm height allows installation in thin ultrabooks as well as standard chassis. Systems limited to M.2 or PCIe slots cannot accept this drive. Buyers needing higher throughput than SATA provides should consider alternative interfaces.

510 MB/s sequential read speed

The headline read figure of 510 MB/s determines whether the J15 meets a workload’s throughput requirement. Write performance of 376 MB/s supports everyday gaming loads and general productivity tasks. If an application demands sustained transfers beyond the SATA 3.0 ceiling, this model will not satisfy that need.

Ciri-ciri utama

  • Sequential reads up to 510 MB/s accelerate boot and load times
  • Sequential writes up to 376 MB/s keep file saves responsive
  • 5-inch SATA 3.0 interface fits laptops and desktops without adapters
  • 7 mm slim profile at .28 in height slides into tight bays
  • 512 GB capacity stores games and work files in one drive

Spesifikasi

BrandDUCI
Used ForGaming
Form Factor2.5-inch
ProtocolSATA
ConnectorSATA
Max Sequential Write376 megabytes_per_second
Height4.94 in x 2.76 in x 0.28 in
Width4.94 in x 2.76 in x 0.28 in
Depth4.94 in x 2.76 in x 0.28 in
Package ContentQuick Start Guide

Versi lain model ini

5 lagi dalam julat yang sama

Keluarga yang sama, memori, penyejuk atau kelajuan jam yang berbeza — bandingkan sebelum membuat keputusan.

Soalan tentang produk ini

What do I need in my laptop or desktop to install the DUCI J15 512GB SSD?

You need a free 2.5-inch drive bay or caddy and a spare SATA data and power cable connected to the motherboard or SATA controller. The drive uses the SATA 3.0 interface and fits the standard 7 mm height.

Will the DUCI J15 512GB run at its advertised 510 MB/s read speed on an older motherboard with SATA 2.0 ports?

The SSD is backward compatible with SATA 2.0 ports, but the interface will limit the maximum sequential read to the SATA 2.0 bandwidth ceiling, so the 510 MB/s figure will not be reached.

How can I verify the DUCI J15 512GB is performing at its rated 376 MB/s write speed after setup?

Run a sequential-write benchmark such as CrystalDiskMark or AS SSD on a clean partition and compare the reported sequential write result with the 376 MB/s specification.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.