Goldshell
Goldshell AE BOX II Aleo Miner 54MH/s 530W Low-Noise mining hardware
An ASIC miner for the Aleo network delivering 54 MH/s at 530 W with 9.81 J/MH efficiency and 35 dB noise
- TypeMining Machine/Miner
- Mining HardwareASIC
- Delivers 54 MH/s hashrate with ±5 % tolerance
- Consumes 530 W at the wall for 9.81 J/MH efficiency
- Runs at just 35 dB for quiet home or office placement
- Compact 171×198×96 mm chassis weighs only 2.54 kg
- Remote management via app with dual-mode connectivity and Wi-Fi support
Aleo ASIC miner for quiet operation
The Goldshell AE BOX II is an ASIC miner built for the Aleo blockchain using the zkSNARK algorithm. It delivers a default hashrate of 54MH/s with a power draw of 530W, yielding an efficiency of 9.81J/MH. The unit measures 171 by 198 by 96 millimetres and weighs 2.54 kilograms.
Suited for home miners needing low noise
At 35dB the device runs quietly enough for residential spaces, and its dual‑mode connection supports Wi‑Fi for remote app control. Buyers who need higher throughput per unit or who cannot source a 12VDC supply rated for at least 10A should consider other hardware.
Check power and environment before ordering
The miner requires a 12VDC input through dual 6‑pin connectors with a 10A cable; no power supply is included. Verify that your location stays within 0 to 35 degrees Celsius and 65 percent relative humidity, and confirm you have adequate airflow for the 4500rpm fan.
Ciri-ciri utama
- Delivers 54 MH/s hashrate with ±5 % tolerance
- Consumes 530 W at the wall for 9.81 J/MH efficiency
- Runs at just 35 dB for quiet home or office placement
- Compact 171×198×96 mm chassis weighs only 2.54 kg
- Remote management via app with dual-mode connectivity and Wi-Fi support
Spesifikasi
| Brand | goldshell |
|---|---|
| Type | Mining Machine/Miner |
| Mining Hardware | ASIC |
Soalan tentang produk ini
What power supply must I already own to run the 530 W miner?
You need a 12 V DC supply that can deliver at least 530 W and provides dual 6-pin connectors with a 10 A rated cable.
Will the 35 dB noise level stay low if I keep my older 45 dB rig on the same shelf?
Yes, the miner runs at 35 dB independently; total room noise will simply be the combined level of both units.
How can I confirm the miner is hitting 54 MH/s after setup?
Open the remote app or web dashboard and check the real-time hashrate reading; it should show 54 MH/s ±5 %.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



