Gulfe
Gulfe ATX power supply 350 W reduced depth 5.9" 2.5 kg
Reduced-depth ATX power supply delivering 350 W with 24-pin, 4-pin, three SATA, two LP4 and one floppy connector
- TypeATX
- Fans1
- Weight2.5
- Replaces several legacy Dell power supplies
- Reduced 5.9" depth fits compact ATX cases
- Over-current and over-power protection safeguards components
- Single fan with 2.5 kg weight for stable cooling
- 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors included
Gulfe ATX 350 W Reduced Depth
The Gulfe ATX power supply delivers 350 W in a reduced-depth chassis measuring 5.86 inches long and 3.3 inches wide, weighing 2.5 kg. It uses a single fan and accepts 115 V or 230 V input across 47 to 63 Hz. Output rails include +3.3 V, +5 V, -5 V, +12 V1, +12 V2, -12 V and +5 V standby.
Suits Legacy Dell Replacements
This unit replaces several older legacy Dell power supplies such as the 0K159T, CX305P-00 and D350R003L models. It fits builds that need a shorter ATX form factor and provides the standard 24-pin ATX, 4-pin P4 12 V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin connectors. Builders needing higher wattage, modular cables or modern GPU power connectors should look at other units.
Check Case Depth and Connector Needs
Verify that your case can accommodate a 5.86-inch deep ATX supply and that the motherboard uses a 20+4 pin main connector plus a 4-pin 12 V CPU plug. Ensure the three SATA power plugs and two LP4 connectors match your drive count. Confirm the 115 V or 230 V input switch matches your local mains voltage before installation.
Ciri-ciri utama
- Replaces several legacy Dell power supplies
- Reduced 5.9" depth fits compact ATX cases
- Over-current and over-power protection safeguards components
- Single fan with 2.5 kg weight for stable cooling
- 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors included
Spesifikasi
| Brand | Gulfe |
|---|---|
| Type | ATX |
| Fans | 1 |
| Weight | 2.5 |
Soalan tentang produk ini
What motherboard power connectors does the unit provide?
It includes a 24 (20+4) pin ATX connector and a P4 12 V 4 pin connector.
Will the 350 W output support legacy components that need −5 V and −12 V rails?
Yes, the supply delivers −5 V and −12 V rails alongside +3.3 V, +5 V, dual +12 V and +5 V standby.
How can I verify the supply is operating correctly once installed?
Check that the fan spins, the system posts, and voltages at the ATX connector read within tolerance for +3.3 V, +5 V and +12 V rails.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



