HP
HP 605835-B21 1 TB SAS 6Gb/s 7200 RPM 2.5" internal hard drive
A 1 TB SAS internal drive spinning at 7200 RPM with hot-plug support for server storage
- InterfaceSAS 6Gb/s
- RPM7200 RPM
- FeaturesStorage Capacity: 1 TBRotational Speed: 7200 rpmDrive Interf
- UsageIdeal for Servers
- Form Factor2.5"
- 1 TB capacity for large server datasets
- 7200 RPM spindle speed for responsive data access
- SAS 6Gb/s interface delivers 600 MB/s maximum transfer rate
- 5" form factor fits dense drive bays
- Hot-pluggable design allows drive swaps without downtime
HP 1 TB SAS 6Gb/s drive
This 1 TB internal hard drive uses a SAS 6Gb/s interface and spins at 7200 RPM in a 2.5 inch form factor. It is designed for server and enterprise storage environments that require hot-pluggable operation and consistent data throughput.
Thermals noise and power in normal use
The drive operates with a maximum external transfer rate of 600 MB/s (4.7 Gbit/s) and standard spindle speed. Physical dimensions are 4.6 inches high, 7 inches wide and 9 inches deep with an approximate weight of 15.87 oz. No specific acoustic or power figures are provided by the supplier.
Behaviour under sustained load
Serial Attached SCSI architecture delivers the flexibility, reliability and scalability needed for 24x7 enterprise data centres handling simultaneous requests. The hot-pluggable design allows drive replacement without system downtime during continuous operation.
Ciri-ciri utama
- 1 TB capacity for large server datasets
- 7200 RPM spindle speed for responsive data access
- SAS 6Gb/s interface delivers 600 MB/s maximum transfer rate
- 5" form factor fits dense drive bays
- Hot-pluggable design allows drive swaps without downtime
Spesifikasi
| Brand | HP |
|---|---|
| Model | 605835-B21 |
| Interface | SAS 6Gb/s |
| RPM | 7200 RPM |
| Features | Storage Capacity: 1 TBRotational Speed: 7200 rpmDrive Interface: SASDrive Interface Standard: 6Gb/s SASDrive Type: InternalDrive Width: 2.5"Hot Pluggable: YesHeight: 4.6" (117.6 mm)Width: 7" (177.8 mm)Depth: 9" (228.6 mm)Weight (Approximate): 450 gLimited Warranty: 1 Year |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Berat penghantaran | 0.91 kg |
| Dimensi bungkusan | 234 × 180 × 132 mm |
Soalan tentang produk ini
How is the 2.5" SAS drive installed in a server bay, and what step is often missed?
Slide the drive into a hot-plug SAS bay until the connector seats, then secure the release latch; the missed step is failing to lock the latch, which leaves the drive unseated.
What maintenance or replacement will the 7200 RPM SAS drive need later?
Mechanical drives eventually develop bad sectors or bearing wear; plan to replace the unit when SMART reallocated-sector counts rise or unusual noise appears.
What limit appears first on the 600 MB/s SAS interface during sustained writes?
The 7200 RPM spindle caps sequential throughput well below the 600 MB/s interface ceiling, so the mechanical media speed becomes the bottleneck.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



