Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green HPE 16GB DDR3 ECC registered DIMM 240-pin module

HPE

HPE 672612-081 16GB DDR3 ECC Registered 1600MHz server RAM

SKU CH-23WY-0Y9XH MPN 672612-081

A 16 GB DDR3 ECC registered DIMM running at 1600 MHz for HP ProLiant BL660c Gen8 servers

  • Type240-Pin DDR3 SDRAM
  • 16 GB capacity supports larger server workloads
  • ECC registered design protects data integrity in critical applications
  • 1600 MHz DDR3 speed delivers 12800 MB/s bandwidth
  • CL11 latency ensures responsive memory access
  • 240-pin DIMM fits HP ProLiant BL660c Gen8 blade servers

16GB DDR3 ECC Registered Module

This 16GB DDR3 SDRAM module operates at 1600 MHz with CL11 latency. It uses registered signal processing and ECC error checking for data integrity. The single 240-pin DIMM runs at 1.50 V and conforms to the PC3-12800 standard. It is designed for server environments requiring reliable memory performance.

Thermals and Power Draw

The module draws power at the standard 1.50 V DDR3 voltage level. Registered buffering reduces electrical load on the server memory controller during operation. No active cooling components are present on the DIMM itself. Thermal behaviour depends entirely on the blade server chassis airflow design.

HP ProLiant BL660c Gen8 Compatibility

This part is validated for the HP ProLiant BL660c Gen8 Blade Server. The registered ECC design meets the platform firmware requirements for error correction. Buyers needing unbuffered memory or non-ECC modules for workstation boards cannot use this DIMM. It serves as a direct replacement or capacity upgrade for the qualified blade system.

Ciri-ciri utama

  • 16 GB capacity supports larger server workloads
  • ECC registered design protects data integrity in critical applications
  • 1600 MHz DDR3 speed delivers 12800 MB/s bandwidth
  • CL11 latency ensures responsive memory access
  • 240-pin DIMM fits HP ProLiant BL660c Gen8 blade servers

Spesifikasi

BrandHPE
Type240-Pin DDR3 SDRAM
Berat penghantaran2.31 kg
Dimensi bungkusan170 × 112 × 36 mm

Soalan tentang produk ini

How do I install the 240-pin DDR3 DIMM into the BL660c Gen8 blade, and which step do people often miss?

Align the notch with the slot key, press straight down until both retention clips click, then verify the module is fully seated by checking the clips are locked; the step often missed is pressing evenly on both ends so the clips engage simultaneously.

What maintenance or replacement will the 16GB ECC registered module need over its service life?

No scheduled maintenance is required; replacement is only needed if the server reports a correctable or uncorrectable ECC error count that exceeds the platform threshold.

What limit appears first when the module runs at 1600MHz under sustained load?

The thermal limit of the blade chassis is typically reached before the memory controller hits its bandwidth ceiling at PC3-12800.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.