Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Ten blue PTFE tubes with brass and steel push-fit connectors on a light background

KEHIPI

KEHIPI 10pcs PC4-M10 M6/M10 PTFE Bowden Fitting Kit 3D Printers Accessory

SKU CH-4KT0-CA3QT

A 10-piece kit with 3 metres of blue PTFE tubing and mixed M6/M10 push-fit connectors for 1.75 mm filament printers

  • Color10*PC4-M10
  • 10-piece kit equips multiple Bowden upgrades
  • 5 m PTFE tube per piece cuts to exact length
  • 0 mm inner diameter matches 1.75 mm filament precisely
  • Copper M6 and stainless M10 fittings resist wear and corrosion
  • Blue PTFE tube handles 2.15–2.20 g/cm³ density for smooth feeding

Bowden Fitting Kit for 1.75 mm Filament

This kit supplies ten push-in connectors and PTFE tubing for Bowden extruders on 1.75 mm filament printers. It includes four PC4-M6 brass fittings with 6 mm threads, four PC4-M10 stainless-steel fittings with 10 mm threads, and two 1.5 m lengths of blue PTFE tube sized at 2 mm inside diameter and 4 mm outside diameter. The tube is rated at a density of 2.15 to 2.20 g/cm³.

Compatibility and Limitations

The components suit printers that accept 4 mm OD PTFE tubing and use either M6 or M10 threaded hot-end or extruder ports, covering models such as Ender-3, Ender-3 V2, Ender-2, CR-10 and Monoprice Mini variants. Builders whose machines require a different tube outer diameter, alternative thread pitches, or proprietary quick-connect styles will need other parts. The kit does not address direct-drive setups that omit Bowden tubing.

Deciding Specification — Tube Inside Diameter

The 2 mm bore of the supplied PTFE tube is the critical dimension that determines whether 1.75 mm filament feeds reliably without binding or excessive friction. If a printer's filament path demands a larger or smaller internal diameter, this tubing will not work correctly.

Ciri-ciri utama

  • 10-piece kit equips multiple Bowden upgrades
  • 5 m PTFE tube per piece cuts to exact length
  • 0 mm inner diameter matches 1.75 mm filament precisely
  • Copper M6 and stainless M10 fittings resist wear and corrosion
  • Blue PTFE tube handles 2.15–2.20 g/cm³ density for smooth feeding

Spesifikasi

BrandAITRIP
Model10*PC4-M10
Color10*PC4-M10

Soalan tentang produk ini

Will the 10mm thread PC4-M10 fittings replace the original couplers on my Ender 3 V2 Bowden extruder?

Yes, the PC4-M10 fittings have a 10mm thread and 4mm inner diameter that match the stock Bowden couplers on Ender 3 and Ender 3 V2 printers.

How can I confirm the blue PTFE tube is seated correctly in the stainless-steel PC4-M10 fittings after installation?

Push the 4mm OD tube into the black end until it hits the internal stop; the collet teeth will grip the tube and a gentle pull should not release it.

Does the 10-piece kit include both the 3-metre blue PTFE tube and the tube cutter, or must I buy them separately?

The kit supplies two 1.5m blue PTFE tubes (3m total), four PC4-M6 fittings, four PC4-M10 fittings and one PTFE tube cutter — everything needed for a Bowden rebuild.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.