KHACHIMO
KHACHIMO AP5047 16V ATX 80 PLUS Gold Power Supply
ATX power supply for APX 16V AP5047 with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for fast wake times
- TypeATX
- Modern Standby support enables rapid wake-from-sleep and superior low-load efficiency
- 80 PLUS Gold certification delivers high efficiency for reduced consumption, noise and heat
- Zero RPM fan mode stops the fan at low and medium loads for silent running
- Resonant LLC topology with DC-to-DC conversion provides clean power and reduces coil whine
- ATX 16V form factor AP5047 designed for compatible system builds
APX 16V ATX Power Supply
The KHACHIMO AP5047 is an ATX power supply built for systems requiring a 16V input. It carries 80 PLUS Gold certification for high efficiency, reducing power draw and heat output. Modern Standby compatibility enables extremely fast wake-from-sleep times and improved low-load efficiency.
Builders needing 16V input and quiet operation
This unit suits builds that demand a 16V ATX power source and benefit from silent running at low to medium loads. It is not for systems requiring a different input voltage or builders who need a higher total wattage than this model provides.
ATX form factor with LLC resonant topology
The supply fits standard ATX mounting points and uses a resonant LLC topology with DC-to-DC conversion for clean, consistent power delivery. Zero RPM fan mode stops the fan entirely at lighter loads, freeing up acoustic headroom for other components while enabling deeper sleep states.
Ciri-ciri utama
- Modern Standby support enables rapid wake-from-sleep and superior low-load efficiency
- 80 PLUS Gold certification delivers high efficiency for reduced consumption, noise and heat
- Zero RPM fan mode stops the fan at low and medium loads for silent running
- Resonant LLC topology with DC-to-DC conversion provides clean power and reduces coil whine
- ATX 16V form factor AP5047 designed for compatible system builds
Spesifikasi
| Type | ATX |
|---|
Soalan tentang produk ini
What motherboard connector does the AP5047 require?
The AP5047 uses a standard ATX 24-pin connector, so your motherboard must provide a matching 24-pin ATX socket for it to work.
Will the 16V design of the AP5047 work with my existing ATX components?
Yes, the AP5047 is an ATX form-factor unit; its 16V output is handled internally, so standard ATX motherboards, graphics cards and drives connect normally.
How can I confirm the AP5047 is running in Zero RPM mode?
When the system is at low or medium load the fan stops completely; if you hear no fan noise under light use, the Zero RPM feature is active.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



