Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Black 150mm square case fan with 38mm thick frame and three-pin connector

Link Depot Corp.

Link Depot Corp. FAN-12038-DB 150mm 38mm 2 Ball 2500RPM 100.4CFM 48.0dBA 3 Pin Black

SKU CH-RA6S-T4KRA MPN FAN-12038-DB

150mm case fan moves 100.4CFM at 2500RPM with dual-ball bearing and 48.0dBA noise

  • Fan Counts1 Fan
  • Fan ControllerNo Controller
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size150mm
  • Fan Thickness38mm
  • High airflow of 100.4 CFM for effective cooling
  • Dual ball bearings for durable long-term operation
  • 2500 RPM speed delivers strong air movement
  • 3-pin connector fits standard motherboard headers
  • 150 mm frame with 38 mm thickness for case compatibility

150 mm high-airflow case fan

The Link Depot FAN-12038-DB is a single 150 mm case fan built for chassis cooling. It spins at 2500 RPM and delivers 100.4 CFM of airflow through a 38 mm thick frame. A dual ball bearing supports the motor for long-term operation. The unit connects via a standard 3 pin power connector.

Best for high static-pressure cooling

This fan suits builders who need strong airflow through restrictive mesh or radiator fins and can tolerate 48.0 dBA of noise. It is not for silent-focused systems where lower decibel levels are a priority. Buyers who require PWM speed control or a bundled fan controller should look at other models because this unit has no controller.

Check 150 mm mounting and 3 pin headers

Verify that your case has 150 mm mounting points with 120 mm hole spacing and enough clearance for the 38 mm thickness. Confirm the motherboard or fan hub provides a 3 pin header for power and speed reporting. Ensure the chassis layout can accommodate the rated airflow direction without obstruction.

Ciri-ciri utama

  • High airflow of 100.4 CFM for effective cooling
  • Dual ball bearings for durable long-term operation
  • 2500 RPM speed delivers strong air movement
  • 3-pin connector fits standard motherboard headers
  • 150 mm frame with 38 mm thickness for case compatibility

Spesifikasi

BrandLink Depot
ModelFAN-12038-DB
Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size150mm
Fan Thickness38mm
Bearing Type2 Ball
RPM2500RPM
Air Flow100.4CFM
Noise Level48.0dBA
Power Connector3 Pin
ColorBlack
Dimensions120 x 120 x 38mm
Berat penghantaran0.27 kg
Dimensi bungkusan127 × 127 × 38 mm

Soalan tentang produk ini

Does my case need a 150 mm mounting area for this fan?

Yes, the fan frame is 150 mm wide and 38 mm thick, so the case must provide a matching 150 mm square opening with at least 38 mm depth.

Will the 3-pin connector let me control speed on an older motherboard with only 3-pin headers?

The 3-pin connector supplies power and a tachometer signal; voltage-based speed control works on legacy 3-pin headers, but PWM control is not available.

How can I confirm the fan is delivering its rated 100.4 CFM airflow after installation?

Monitor the motherboard fan-speed reading — it should report close to 2500 RPM under full voltage — and feel strong air movement at the exhaust vent.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.