Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Silver rectangular 3.5 inch bare hard drive with green circuit board visible

Maxtor

Maxtor DiamondMax Plus 9 6Y160P0 160GB 7200 RPM 8MB IDE ATA133 3.5" internal hard drive

SKU CH-3FFT-R5384 MPN 6Y160P0

A 160GB 3.5" IDE desktop drive spinning at 7200 RPM with 8MB cache and 9.3ms seek time

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity160GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time9.3ms
  • 160 GB capacity stores large media libraries
  • 7200 RPM spindle speeds up data access
  • 8 MB cache buffers bursts for smoother throughput
  • IDE Ultra ATA133 interface fits legacy desktop builds
  • 3 ms average seek cuts file-retrieval delay

Maxtor DiamondMax Plus 9 160GB IDE Drive

The Maxtor DiamondMax Plus 9 6Y160P0 is a 160GB 3.5-inch internal hard drive spinning at 7200 RPM with an 8MB cache. It connects via the IDE Ultra ATA133 interface and is suited for legacy desktop systems or industrial equipment requiring parallel ATA storage. The drive includes Maxtor Shock Protection and Data Protection Systems for basic data integrity.

Check Motherboard IDE Port and OS Limits

Verify that your motherboard provides a functional IDE channel and that the BIOS recognises drives of this capacity. Some older operating systems impose partition limits below 160GB, so confirm the OS supports the full space. The bare-drive packaging means no cables, brackets or mounting screws are included; source them separately if your chassis lacks spares.

3.5-Inch Form Factor and Parallel Connector

The standard 3.5-inch form factor fits typical desktop drive bays using four side or bottom mounting holes. The 40-pin IDE connector and separate Molex power plug require correct orientation during installation. Rated average seek time is 9.3ms with 4.2ms average latency, reflecting the mechanical performance of this 2023-listed new-old-stock unit.

Ciri-ciri utama

  • 160 GB capacity stores large media libraries
  • 7200 RPM spindle speeds up data access
  • 8 MB cache buffers bursts for smoother throughput
  • IDE Ultra ATA133 interface fits legacy desktop builds
  • 3 ms average seek cuts file-retrieval delay

Spesifikasi

BrandMaxtor
SeriesDiamondMax Plus 9
Model6Y160P0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity160GB
RPM7200 RPM
Cache8MB
Average Seek Time9.3ms
Average Latency4.2ms
FeaturesMaxtor Shock Protection and Data Protection Systems
Form Factor3.5"
Berat penghantaran0.91 kg
Dimensi bungkusan152 × 102 × 51 mm

Soalan tentang produk ini

Does the bare-drive packaging include cables or mounting screws, or must they be bought separately?

The drive is supplied as a bare unit only; IDE cables, power adapters and mounting screws are not included and must be purchased separately.

Is the 160 GB capacity the only option in the DiamondMax Plus 9 6Y160P0 line?

The model number 6Y160P0 identifies the single 160 GB variant; other capacities carry different model numbers.

What does the 7200 RPM spindle speed mean for everyday desktop use?

The 7200 RPM rotation gives an average seek time of 9.3 ms and latency of 4.2 ms, providing responsive file access for typical desktop workloads.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.